Difference between revisions of "TAT1XY Creating Tasks on Fota"

From Wiki Knowledge Base | Teltonika GPS
Line 5: Line 5:
 
TAT1XY devices connect to the platform <b>only on two occasions</b>:<br>
 
TAT1XY devices connect to the platform <b>only on two occasions</b>:<br>
 
1. Device is switched ON (power toggle switch from OFF position to ON position).<br>
 
1. Device is switched ON (power toggle switch from OFF position to ON position).<br>
2. Device receives SMS/GPRS command “web_connect”. <b>Please note</>, device is only able to receive commands when it is not in sleep mode. It is advised to schedule a GPRS command on the server so that it is sent automatically the next time device wakes up and connects to deliver a record.<br>
+
2. Device receives SMS/GPRS command “web_connect”. <b>Please note</b>, device is only able to receive commands when it is not in sleep mode. It is advised to schedule a GPRS command on the server so that it is sent automatically the next time device wakes up and connects to deliver a record.<br>
  
  

Revision as of 12:44, 29 November 2023

Main Page > Autonomous Trackers > TAT100 > TAT100 Manual > TAT1XY Creating Tasks on Fota

Connecting to Fota platform

TAT1XY devices connect to the platform only on two occasions:
1. Device is switched ON (power toggle switch from OFF position to ON position).
2. Device receives SMS/GPRS command “web_connect”. Please note, device is only able to receive commands when it is not in sleep mode. It is advised to schedule a GPRS command on the server so that it is sent automatically the next time device wakes up and connects to deliver a record.


Firmware update tasks on Fota platform

Configuration update tasks on Fota platform