Revision as of 15:19, 8 December 2023

Page Description

This page will describe EYE device functionalities, their flow and functionality supporting software versions.

EYE APP 1.2.2-89

Search device with QR scan

Now you can find devices with QR scan by pressing scan button and scanning device QR code.

Customized Sensor Selection

Users can customize their device by selecting only the sensors they require. This allows users to specify which sensor information is read and advertised, ensuring power-efficient data collection and transmission.

Auto-Disconnect Timer

To enhance user privacy and save energy, we've introduced an auto-disconnect feature. After 2 minutes of inactivity, users will be automatically disconnected from the device. Before disconnection, you will have the option to maintain the connection.

Visible battery voltage

Eye App now provides a clear and convenient readout of the battery's voltage level, keeping users informed about their device's power status.

12 characters name

Users can now assign names of up to 12 characters, enabling them to configure their device with a full MAC address as the name.

Functionalities

Connecting to the device

SW version requirements	EYE APP: 1.2.0-60+ Firmware: 1.2.1.R.0 to 1.2.8.R.2
Step No.	1	2	3	4
Short step desc.	Tap the selected device to connect to it	Wait for connection	Enter PIN	Successfully connected
Successful attempt at functionality visual
Short step desc.	Tap the selected device to connect to it	Enter PIN incorrectly	Fail to enter PIN correctly 4 more times	Wait for 5 min timeout and enter PIN incorrectly	Fail to enter PIN correctly 4 more times
Additional desc.			Device is locked for 5 min but will allow to connect with PIN again after timeout		Device is locked for 5 min but will allow to connect with PIN again after timeout, thus this is continued in infinite loop.
Failed attempt at functionality visual

SW version requirements	EYE APP: 1.2.0-60+ Firmware: 1.2.9.R.8+
Short step desc.	Tap the selected device to connect to it	Enter PIN incorrectly	Fail to enter PIN correctly 4 more times	Wait for 5 min timeout and enter PIN incorrectly	Fail to enter PIN correctly 4 more times
Additional desc.			Device is locked for 5 min but will allow to connect with PIN again after timeout		Device is locked with PUK code now and will remain so until correct PUK is entered, see PUK code unlock.
Failed attempt at functionality visual

PUK code unlock

SW version requirements	EYE APP: 1.2.0-60+ Firmware: 1.2.9.R.8+
Step No.
Short step desc.	Tap the blocked device to connect to it	Enter PUK	Connected
Additional desc.			PIN automatically resets to default
Successful attempt at functionality visual
Step desc.	Tap the selected device to connect to it	Enter PUK incorrectly	Fail to enter PIN correctly 4 more times
Additional desc.		PUK is rejected and you can only go back or enter correct PUK
Failed attempt at functionality visual

Hibernate mode:

Wake up:

SW version requirements	Firmware: 1.2.9.R.8+
Step No.	1-3	4
Short step desc.	Attach magnet to sleeping device and wait for LED to blink.	Device starts broacasting
Additional desc.		Now device is discoverabled, scannable, connectable via BLE.
Successful attempt at functionality visual

Send to sleep:

SW version requirements	EYE APP: 1.2.0-60+ Firmware: 1.2.9.R.8+
Step No.	1	2	3
Short step desc.	While connected and in overview tap "Send device to sleep"	Confirm your selection	Wait for EYE App to disconnect
Additional desc.			Device is no longer connectable or findable until wake up step is performed.
Successful attempt at functionality visual

@@ Line 3: / Line 3: @@
 This page will describe EYE device functionalities, their flow and functionality supporting software versions.
+=EYE APP 1.2.2-89=
+==Search device with QR scan==
+Now you can find devices with QR scan by pressing scan button [[File:EYE_APP_QR_BUTTON.png|frameless|25x25px]] and scanning device QR code.
+<br><br>[[File:EYE_APP_QR_PRESS_BUTTON.png|frameless|250px]][[File:EYE_APP_QR_SCAN.png|frameless|250px]][[File:EYE_APP_QR_SCAN_EXAMPLE.png|frameless|250px]]
+==Customized Sensor Selection==
+Users can customize their device by selecting only the sensors they require. This allows users to specify which sensor information is read and advertised, ensuring power-efficient data collection and transmission.
+<br><br>[[File:EYE_APP_ONE_SENSOR_VIEW.png|frameless|250px]][[File:EYE_APP_CHOOSE_ONE_SENSORS.png|frameless|250px]][[File:EYE_APP_CHOOSE_FOUR_SENSORS.png|frameless|250px]][[File:EYE_APP_FOUR_SENSOR_VIEW.png|frameless|250px]]
+==Auto-Disconnect Timer==
+To enhance user privacy and save energy, we've introduced an auto-disconnect feature. After 2 minutes of inactivity, users will be automatically disconnected from the device. Before disconnection, you will have the option to maintain the connection.
+<br><br>[[File:EYE_APP_TWO_MINUTE_WAIT.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_AFTER_TWO_MINUTES.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_WHILE_CONFIGURING.png|frameless|250px]]
+==Visible battery voltage==
+Eye App now provides a clear and convenient readout of the battery's voltage level, keeping users informed about their device's power status.
+<br><br>[[File:EYE_APP_VISIBLE_BATTERY_VOLTAGE.png|frameless|250px]]
+==12 characters name==
+Users can now assign names of up to 12 characters, enabling them to configure their device with a full MAC address as the name.
+<br><br>[[File:EYE APP 12 CHAR NAME.png|frameless|250px]]
 ===<big>Functionalities</big>===