4,628
edits
Changes
SAS XYZ Bluetooth 4.0 settings (view source)
Revision as of 16:29, 28 December 2023
, 16:29, 28 December 2023Text replacement - "Bluetooth(?!®)" to "Bluetooth®"
__TOC__
__TOC__
<br>
<br>
{{{model|X}}} offers Bluetooth 4.0 (Bluetooth Low Energy, also referred as BLE) functionality.
{{{model|X}}} offers Bluetooth® 4.0 (Bluetooth® Low Energy, also referred as BLE) functionality.
==Common settings==
==Common settings==
{| style="width: 100%"
{| style="width: 100%"
|[[Image:Bluetooth 4.0 common settings.png|right]]
|[[Image:Bluetooth® 4.0 common settings.png|right]]
* <b>Non Stop Scan</b> - Enabled Non Stop Scan feature, the device will try to scan for the sensors all the time if any of them are configured.
* <b>Non Stop Scan</b> - Enabled Non Stop Scan feature, the device will try to scan for the sensors all the time if any of them are configured.
* <b>BLE Scan Start Period</b> - This parameter determines when the next BLE scan will start for Beacons and TZ sensors.
* <b>BLE Scan Start Period</b> - This parameter determines when the next BLE scan will start for Beacons and TZ sensors.
===Configuration modes===
===Configuration modes===
{| style="width: 100%"
{| style="width: 100%"
[[Image:Bluetooth 4.0 common settings non stop scan.png|right]]
[[Image:Bluetooth® 4.0 common settings non stop scan.png|right]]
* If the Non Stop Scan is <b>Enabled</b>, the Non Stop sensor scans until any error will be hidden. Although BLE scan duration will still be active because it is important for btgetlist SMS command.
* If the Non Stop Scan is <b>Enabled</b>, the Non Stop sensor scans until any error will be hidden. Although BLE scan duration will still be active because it is important for btgetlist SMS command.
|}
|}
{| style="width: 100%"
{| style="width: 100%"
|[[Image:Bluetooth 4.0 common settings.png|right]]
|[[Image:Bluetooth® 4.0 common settings.png|right]]
* If Non Stop Scan <b>Disabled</b>, Scan period is selected manually.<br><br>
* If Non Stop Scan <b>Disabled</b>, Scan period is selected manually.<br><br>
The Scan time period will be selected from two sources:
The Scan time period will be selected from two sources:
*<b>Offset</b> – value to be added to output data. Used only with Save action.
*<b>Offset</b> – value to be added to output data. Used only with Save action.
How to correctly configure the <b>Bluetooth LE solutions</b>, can be found here:
How to correctly configure the <b>Bluetooth® LE solutions</b>, can be found here:
*[[How to read data from TZ-BT04/05/05B sensor with TMT250 device | How to read data from TZ-BT04/05/05B sensor with Teltonika device]]
*[[How to read data from TZ-BT04/05/05B sensor with TMT250 device | How to read data from TZ-BT04/05/05B sensor with Teltonika device]]
*[[How to read data from BLE Sensors]]
*[[How to read data from BLE Sensors]]