FTC921 Tracking settings: Difference between revisions

Line 3:

[[File:FTC record settings.png|right|500 px]]

'''Saving / sending mode'''

'''Saving/sending mode'''

This feature will be used to save and send records to server without time ~~sinchronization~~.

This feature will be used to save and send records to the server without time synchronization.

'''Possible options:'''

''After Position Fix'' - records will be saved and ~~send~~ only after position fix

''After Position Fix'' - records will be saved and sent only after position fix.

''After Time Sync'' - records will be saved and ~~send~~ only after time synchronization

''After Time Sync'' - records will be saved and sent only after time synchronization.

''Always'' - records will be ~~always~~ saved and ~~send~~ even if ~~will not be~~ time synchronization

''Always'' - records will always be saved and sent even if there is no time synchronization.

Note: If record is without valid coordinates – (there were no GPS fix in the moment of data acquisition) – Longitude, Latitude and Altitude values are last valid fix, and Angle, Satellites and Speed ~~are~~ 0. ~~After~~ a reboot, it will send zero coordinates.

Note: If the record is without valid coordinates – (there were no GPS fix at the moment of data acquisition) – Longitude, Latitude and Altitude values are sent as per the last valid fix, and Angle, Satellites and Speed will be 0. However, if there is a reboot then it will send zero coordinates.

'''Sort by'''

Can be set either Newest or Oldest. For example if the Oldest is marked the device first will send the Oldest information, if Newest ~~then Device~~ will send the newest information. If the device had no connection (GSM or GPRS) due to bad coverage or being in an area with no signal. ~~Device~~ continues to save records into internal memory, once GSM and GPRS are recovered device will start sending saved data to server. In this example, if Oldest is configured - until newest data is seen on the server all of the oldest records have to be sent first. If Newest is configured - previous data and track won't be seen until newest data is sent first. If high priority on I/O parameters or Features ~~are~~ configured device will send the generated records with High Priority first.

Can be set either Newest or Oldest. For example, if the Oldest is marked the device first will send the Oldest information, if the Newest is marked, the device will send the newest information. Suppose the device had no connection (GSM or GPRS) due to bad coverage or being in an area with no signal. The device continues to save records into internal memory, once GSM and GPRS are recovered, the device will start sending saved data to the server. In this example, if Oldest is configured - until the newest data is seen on the server all of the oldest records have to be sent first. If Newest is configured - previous data and track won't be seen until the newest data is sent first. If high priority on I/O parameters or Features is configured device will send the generated records with High Priority first.

~~'''ACK Type'''~~

Determines what method the device uses to receive confirmation from the server TCP/IP or AVL. TCP/IP means that the confirmation will be included in the TCP/IP layer and no additional message will be needed to acknowledge the record receiving. AVL means that the device will expect an additional AVL message from the server - according to the Data sending protocols described ('''[[Codec#Codec 8 Extended|Codec 8 Extended]]''')

'''Data protocol'''