Difference between revisions of "Template:FMB209 First start card"

From Wiki Knowledge Base | Teltonika GPS
 
Line 2: Line 2:
  
  
<b>Teltonika {{{model|FMB209}}}  is a SPECIAL waterproof tracker with Bluetooth connectivity and integrated backup battery. Device was designed to meet Indian government regulation AIS 140</b>{{{pic|[[Image:FMB209 00 Demo.png|400px|right]]}}}
+
Small and professional water-resistant tracker with internal high gain GNSS/GSM antennas, Bluetooth®, RS232 data transmission and high-capacity internal Li-ion battery. The device is certified to meet European and Indian standards by the Automotive Research Association of India (ARAI).{{{pic|[[Image:FMB209 00 Demo.png|400px|right]]}}}
  
  

Latest revision as of 07:44, 17 June 2024

Qsg rut950 teltonika.PNG


Small and professional water-resistant tracker with internal high gain GNSS/GSM antennas, Bluetooth®, RS232 data transmission and high-capacity internal Li-ion battery. The device is certified to meet European and Indian standards by the Automotive Research Association of India (ARAI).

FMB209 00 Demo.png



How to insert Micro-SIM card and connect the battery

  1. Unscrew 6 screws counterclockwise that are located on the bottom of the FMB209 device.
  2. Remove the cover.
  3. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  4. Connect battery as shown to device.
  5. After configuration, see “PC Connection (Windows)”, attach device cover back and screw in all screws.

Device is ready to be mounted.

FMB208 cover 1.pngFMB208 cover 2.pngFMB208 cover 3.pngFMB208 cover 4.pngFMB208 cover 5.png

Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

Cable colors

PIN NUMBER PIN NAME DESCRIPTION
208 connector.png
Red VCC (10-30)V DC (+) Power supply (+10...30 V DC)
Black GND (-) Ground
Yellow DIN 1 Digital input, channel 1
White/Green DIN 2 Digital input, channel 2
White DOUT 1 Digital Output Channel 1
Grey AIN 1/DIN 3 Analog input, channel 1. Input range: 0-30 V DC/Digital input channel 3
White/Orange RS232-TX Output for data transmission through RS-232
Violet RS232-RX Input for data reception through RS-232
Green AIN 2/DIN 4 Analog input, channel 2. Input range: 0-30 V DC/Digital input channel 4
Blue DOUT 2 Digital output 2