Template:FMB640 CAN SMS/GRPS commands
From Wiki Knowledge Base | Teltonika GPS
Revision as of 10:08, 10 July 2019 by Gediminas.suminas (talk | contribs) (→Commands related to LV-CAN200/ALL-CAN300)
Command | Description | Response |
---|---|---|
lvcansetprog # | Set program number to LV-CAN200/ ALL-CAN300 that is connected to FMB640. # three digit number that identity vehicle. |
Yes |
lvcansimpletacho # | Add or remove simpletacho start byte. # - 0 or 1 (0 – don’t add start byte, 1 – add start byte). |
No |
lvcangetprog | Get program number from LV-CAN200/ ALL-CAN300 that is connected to FMB640. | Yes |
lvcangetinfo | Get information about connected LV-CAN200/ALL-CAN300. | Yes |
lvcanclear # | Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values. # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).. |
Yes |