FMB lvcandtcclear

From Teltonika Telematics Wiki
Revision as of 15:07, 18 December 2024 by BaronenasT (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Possible answers:

DTC clear cmd not supported.
DTCs cleared. DTCs read: <total error codes>
CAN-CONTROL Not connected!

Note: Minimum required firmware version is 03.30.01.Rev.05

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=FMB_lvcandtcclear&oldid=101753"