Template:FMB2 temporary

From Teltonika Telematics Wiki
Revision as of 14:17, 29 May 2018 by Simkunas.ma (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

It is strongly recommended to mount FMB2YX outside of the vehicle with the sticker direction to the sky.

Most commercial trucks have plastic hood in front of the vehicle. It is recommended to mount FMB2YX under the hood. Power cord output of the device should be at the bottom. If it is not possible, if a front hood is made of some kind of metal, the device can be mounted inside the car on the front panel as close as possible to the front window.
It is strongly recommended to mount FMB2YX outside of the vehicle with the sticker direction to the sky.

Most light vehicles has oblique front window that opens most part of interior front panel. FMB2YX can be mounted under the plastic panel behind the front window, with the sticker direction to a window (sky).
Best FMB2YX mounting position is outside of vehicle with any metal above the device. Recommended deviation from horizontal axis of vehicle max 3-5°.

Mounting position and recommended deviation from longitudinal axis of vehicle ±2°.
FMB2YX device can not be mounted inside in the vehicle door!

FMB2YX device cannot be mounted inside the vehicle!

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB2_temporary&oldid=13503"