Template:FMA2Li Connecting power wires

From Teltonika Telematics Wiki
Revision as of 09:30, 6 September 2018 by Artur.tomasevski (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
  1. Device should be connected directly to battery. Power supply: 6V/12V/24V.
  2. If FMB2YX is used in 6V system and power cables are extended.

Extension cable resistance should be less than 60 mΩ in sum of both, positive and negative, wires. 30 mΩ for single wire.

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMA2Li_Connecting_power_wires&oldid=18344"