Template:FMB630 Device Family Parameter list
From Wiki Knowledge Base | Teltonika GPS
Revision as of 12:14, 30 July 2019 by Aurimas.vanagas (talk | contribs) (→I/O#0 averaging constant)
System parameters
| Parameter | ID | Parameter value | Value type | ||||
|---|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | ||||
| Sleep Mode | x000 | 0 | 3 | 0 | - | U8 | |
| 0 | Disable | ||||||
| 1 | Enable | ||||||
| 2 | Deep sleep | ||||||
| 3 | Online deep sleep | ||||||
| Sleep Timeout | x001 | 0 | 9000 | 1 | - | U16 | |
| Ignition source | x900 | 0 | 5 | 0 | - | U8 | |
| 0 | Power voltage | ||||||
| 1 | DIN 1 | ||||||
| 2 | DIN 2 | ||||||
| 3 | DIN 3 | ||||||
| 4 | DIN 4 | ||||||
| 5 | Movement | ||||||
| High Voltage Level(for Ignition) | x901 | 0 | 30000 | 0 | - | U16 | |
| Low Voltage Level (for Ignition) | x902 | 0 | 30000 | 0 | - | U16 | |
GPRS data sending settings
| Parameter | ID | Parameter value | Value type | |||
|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | |||
| Server 1 | ||||||
| GPRS Context Activation | x240 | 0 (Disable) | 1 (Enable) | 0 | - | S8 |
| Protocol | 0 (TCP) | 1 (UDP) | 0 | - | U8 | |
| Server Response Timeout | 5 | 300 | 5 | - | U16 | |
| Domain | Empty | 56 char | Empty | - | - | |
| Target Server Port | 0 | 65535 | 0 | - | U16 | |
| Configuring format: | <Enable>,<IP>,<port>,<protocol>,<Server Reponse Tmo> | |||||
| Server 2 | ||||||
| GPRS Context Activation | x242 | 0 (Disable) | 1 (Enable) | 0 | - | S8 |
| Protocol | 0 (TCP) | 1 (UDP) | 0 | - | U8 | |
| Domain | Empty | 56 char | Empty | - | - | |
| Target Server Port | 0 | 65535 | 0 | - | U16 | |
| Configuring format: | <Enable>,<IP>,<port>,<protocol> | |||||
GPRS data limit settings
| Parameter | ID | Parameter value | Value type | |||
|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | |||
| Enable GPRS limits | x241 | 0 (Disable) | 1 (Enable) | 0 | - | U8 |
| Data limit Home | 1 | 10000 | 100 | - | U16 | |
| Data limit Roaming | 1 | 10000 | 10 | - | U16 | |
| Configuring format: | <Enable>,, | |||||
SMS security settings
| Parameter | ID | Parameter value | Value type | |||
|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | |||
| SMS Login | x252 | Empty | 5 char | Empty | - | S8[5] |
| SMS Password | x253 | Empty | 5 char | Empty | - | S8[5] |
| Authorized phone numbers | x260-x269 | Empty | 16 char | Empty | - | S8[17] |
SMS data sending settings
| Parameter | ID | Parameter value | Value type | |||
|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | |||
| SMS Data | x250 | 0 (Disable) | 1 (Enable) | 0 | - | U8 |
| SMS Data send week time schedule | x273 | Binary decoding | Binary decoding | - | - | 20 byte array |
| Configuring format: | <x1><x2><x3><x4>......<x19> | |||||
Operator list settings
| Parameter | ID | Parameter value | Value type | |||
|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | |||
| Preferred Operator | x271 | 0 | 99999999 | 0 | - | U32 |
| Black List Operator | x272 | 0 | 99999999 | 0 | - | U32 |
| Configuring format: (setparam Y271 X) |
X is start position. If no X is set starts from 0 Max 19 operator codes can be set (separated by comma) in one SMS command. | |||||
| Reading format: (getparam Y271 X) |
X values can be 1,2,3. If X = 1, Operator codes from 0-19 are read from configuration and sent via SMS. If X = 2, Operator codes from 20-39 are read from configuration and sent via SMS. If X = 3, Operator codes from 40-49 are read from configuration and sent via SMS. If X = any other, Operator codes from 0-19 are read from configuration and sent via SMS *User must use X, without X value device responds that parameter is wrong or it can respond with wrong operator codes. | |||||
Data Acquisition settings
| Parameter | ID | Parameter value | Value type | |||
|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | |||
| Data acquisition modes | x010 | |||||
| Min Period (in seconds) | 0 | 9999999 | 600 | - | U32 | |
| Min Distance (in meters) | 0 | 65535 | 0 | - | U32 | |
| Min Angle (in degrees) | 0 | 180 | 0 | - | U16 | |
| Min Speed (in km/h) | 0 | 400 | 0 | - | U16 | |
| Min Speed Source | 0/1/2/3/4 (0-GPS, 1-LVCAN, 2-ALLCAN, 3-FMS, 4-KLINE) | 0 | - | U8 | ||
| Min Saved Records | 1 | 25 | 10 | - | U8 | |
| Min Send Period (in seconds) | 0 | 9999999 | 600 | - | U32 | |
| Configuring format: | <minperiod>,<mindistance>,<minangle>,<minspeed>,<minspeedsource>,<minsavedrec>,<sendperiod> | |||||
Geofencing settings
| Parameter | ID | Parameter value | Value type | ||||
|---|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | ||||
| Frame Border (in meters) | x020 | 0 | 9999999 | 1 | 1000 | U32 | |
| Geofence Overspeed control | x021 | 0 | 5 | 0 | - | U8 | |
| Geofence Zone #1 | x030 | ||||||
| Zone #1 Shape | 0 (Circle) | 1 (Rectangle) | 0 | - | U32 | ||
| Zone #1 priority | 0 | 7 (exl. 3) | 0 | - | U8 | ||
| 0 | Low | ||||||
| 1 | High | ||||||
| 2 | Panic | ||||||
| 4 | SW21 | ||||||
| 5 | SW22 | ||||||
| 6 | SW23 | ||||||
| 7 | SW24 | ||||||
| Zone #1 Generate Event | 0 | 3 | 0 | - | U8 | ||
| 0 | No Event | ||||||
| 1 | On enter | ||||||
| 2 | On exit | ||||||
| 3 | On both | ||||||
| Min Angle (in degrees) | 0 | 180 | 0 | - | U16 | ||
| Zone #1 Longitude X1 (Rectangle) / X (Circle) | -180 | 180 | 0 | - | Float | ||
| -180 | 180 | 0 | - | Float | |||
| Zone #1 Latitude Y1 (Rectangle) / Y (Circle) | -90 | 90 | 0 | - | Float | ||
| -90 | 90 | 0 | - | Float | |||
| Zone #1 Longitude X2 (Rectangle) / R (Circle) | -180 | 180 | 0 | - | Float | ||
| 0 | 180 / 9999999.99 | 0 | 0 | Float | |||
| Zone #1 Latitude Y2 (Rectangle) / None (Circle) | -90 | 90 | 0 | - | Float | ||
| - | - | - | - | - | |||
| Configuring format: | <shape>,<priority>,<generateEvent>,<fx1>,<fy1>,<fx2>,<fy2> | ||||||
| Geofence Zone #2 | x031 | Same configuration as Geofence Zone #1 | |||||
| Geofence Zone #3 | x032 | ||||||
| Geofence Zone #4 | x033 | ||||||
| Geofence Zone #5 | x034 | ||||||
| Geofence Zone #6 | x035 | ||||||
| Geofence Zone #7 | x036 | ||||||
| Geofence Zone #8 | x037 | ||||||
| Geofence Zone #9 | x038 | ||||||
| Geofence Zone #10 | x039 | ||||||
| Geofence Zone #11 | x040 | ||||||
| Geofence Zone #12 | x041 | ||||||
| Geofence Zone #13 | x042 | ||||||
| Geofence Zone #14 | x043 | ||||||
| Geofence Zone #15 | x044 | ||||||
| Geofence Zone #16 | x045 | ||||||
| Geofence Zone #17 | x046 | ||||||
| Geofence Zone #18 | x047 | ||||||
| Geofence Zone #19 | x048 | ||||||
| Geofence Zone #20 | x049 | ||||||
Auto Geofencing settings
| Parameter | ID | Parameter value | Value type | ||||
|---|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | ||||
| Autogeofence | x290 | ||||||
| Deactivate By | 0 (Ignition) | 1 (iButton) | 0 | - | U8 | ||
| Activation Timeout (in seconds) | 0 | 65535 | 60 | 60 | U16 | ||
| Min Angle (in degrees) | 0 | 180 | 0 | - | U16 | ||
| Zone #1 priority | 0 | 7 | 1 | 1 | U8 | ||
| 0 | Low | ||||||
| 1 | High | ||||||
| 2 | Panic | ||||||
| 4 | SW21 | ||||||
| 5 | SW22 | ||||||
| 6 | SW23 | ||||||
| 7 | SW24 | ||||||
| Zone #1 Generate Event | 0 | 3 | 0 | 2 | U8 | ||
| 0 | No Event | ||||||
| 1 | On enter | ||||||
| 2 | On exit | ||||||
| 3 | On both | ||||||
| Radius (in meters) | 0 | 9999999 | 100 | 100 | U32 | ||
| Configuring format: | <deactivateBy>,<tmo>,<priority>,<eventGenerating>,<radius> | ||||||
Towing Detection settings
| Parameter | ID | Parameter value | Value type | |||
|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | |||
| Towing Detection | X917 | 0 (Disable) | 2 (High priority) | 0 | - | U8 |
| Activation Tmo (min) | 0 | 1440 | 5 | - | - | |
| Ignition Check (sec) | 0 | 60 | 5 | - | - | |
| Duration (ms) | 100 | 5000 | 1000 | 1000 | - | |
| Acceleration | 0.15 | 5 | 0.25 | 0.25 m/s^2 | - | |
| Angle (deg.) | 0.5 | 5 | 1.0 | 1.0 | U8 | |
| Make Call Number | 0 | 9 | - | - | - | |
| Configuring Format | <priority>,<activationTmo>,<TowingEvtTmo>,<Duration>,<Acceleration>,<TowingAngle>,<TowingCallNr> | |||||
iButton List
| Parameter | ID | Parameter value | Value type | |||
|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | |||
| Authorized iButtons | 500-999 | 0 | FFFFFFFF | 0 | - | U64 |
| FFFFFFFF | ||||||
Eco/Green driving settings
| Parameter | ID | Parameter value | Value type | ||||
|---|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | ||||
| Eco driving type | x910 | 0 | 5 | 0 | - | U8 | |
| 0 | Disable | ||||||
| 1 | No DOUT control | ||||||
| 2 | DOUT1 control | ||||||
| 3 | DOUT2 control | ||||||
| 4 | DOUT3 control | ||||||
| 5 | DOUT4 control | ||||||
| Eco source | 0 (accelerometer) | 1 (GPS) | 0 | - | U8 | ||
| Max Acceleration Force | 5 | 100 | 22 | 25 | Float | ||
| Max Braking Force | 5 | 100 | 25 | 35 | Float | ||
| Max Cornering Force | 5 | 100 | 21 | - | Float | ||
| Acceleration Active Output Duration | 0 | 100 | 1 | - | Float | ||
| Breaking Active Output Duration | 0 | 100 | 1 | - | Float | ||
| Cornering Active Output Duration | 0 | 100 | 1 | - | Float | ||
| Configuring format: | <Eco driving type>,<Ecosource><MaxAcceleration>,<MaxBraking>,<MaxCornering>,<AccOutputDuration>,<BrakingOutputDuration>,<CorneringOutputDuration> | ||||||
Overspeeding settings
| Parameter | ID | Parameter value | Value type | ||||
|---|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | ||||
| Overspeeding mode | x911 | 0 | 5 | 0 | - | U8 | |
| 0 | Disable | ||||||
| 1 | No DOUT control | ||||||
| 2 | DOUT1 control | ||||||
| 3 | DOUT2 control | ||||||
| 4 | DOUT3 control | ||||||
| 5 | DOUT4 control | ||||||
| Max Allowed Speed | 0 | 300 | 90 | - | U16 | ||
| Configuring format: | <Overspeeding mode>,<MaxSpeed> | ||||||
Immobilizer settings
| Parameter | ID | Parameter value | Value type | ||||
|---|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | ||||
| Immobilizer mode | x912 | 0 | 5 | 0 | - | U8 | |
| 0 | Disable | ||||||
| 1 | No DOUT control | ||||||
| 2 | DOUT1 control | ||||||
| 3 | DOUT2 control | ||||||
| 4 | DOUT3 control | ||||||
| 5 | DOUT4 control | ||||||
| iButton List checking | 0 (Disable) | 1 (Enable) | 0 | - | U8 | ||
| Ignition Timeout | 1 | 255 | 30 | - | U16 | ||
| Configuring format: | <ImmobMode>,<button_enable>,<TMO> | ||||||
Excessive Idling settings
| Parameter | ID | Parameter value | Value type | ||||
|---|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | ||||
| Excessive Idling | x913 | 0 (Disable) | 1 (Enable) | 0 | - | U8 | |
| Time to stationary | 0 | 255 | 1 | - | U16 | ||
| Time to movement | 0 (Disable) | 255 | 1 | - | U16 | ||
| Configuring format: | <Enable>, | ||||||
Jamming settings
| Parameter | ID | Parameter value | Value type | ||||
|---|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | ||||
| Jamming Detection | x914 | 0 | 5 | 0 | - | U8 | |
| 0 | Disable | ||||||
| 1 | No DOUT control | ||||||
| 2 | DOUT1 control | ||||||
| 3 | DOUT2 control | ||||||
| 4 | DOUT3 control | ||||||
| 5 | DOUT4 control | ||||||
| Sensitivity | 1 (low) | 3 (High) | 0 | - | U8 | ||
| Timeout | 1 | 255 | 60 | - | - | ||
| DOUT duration | 1 | 255 | 0 | - | U16 | ||
| Configuring format: | <Enable>,<Sensitivity>,<Start_TMO>,<DOUT_duration_TMO> | ||||||
iButton Notification settings
| Parameter | ID | Parameter value | Value type | ||||
|---|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | ||||
| iButton notification | x915 | 0 | 5 | 0 | - | U8 | |
| 0 | Disable | ||||||
| 1 | No DOUT control | ||||||
| 2 | DOUT1 control | ||||||
| 3 | DOUT2 control | ||||||
| 4 | DOUT3 control | ||||||
| 5 | DOUT4 control | ||||||
| Timeout | 1 | 65530 | 0 | - | U16 | ||
| Configuring format: | <Enable/Dout control>,<DOUT TMO> | ||||||
Crash Detection settings
| Parameter | ID | Parameter value | Value type | ||||
|---|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | ||||
| Scenario | x918 | 0 (Disable) | 1 (Enable) | 0 | - | U8 | |
| Acceleration Threshold | 16 | 8000 | 4000 | - | U8 | ||
| Duration | 0 | 600 | 10 | - | U8 | ||
| Configuring format: | <Scenario>,<Threshold>,< Duration> | ||||||
Trip settings
| Parameter | ID | Parameter value | Value type | ||||
|---|---|---|---|---|---|---|---|
| MIN | MAX | Default | Recommended | ||||
| Trip | x280 | 0 (Disable) | 1 (Enable) | 0 | - | U8 | |
| Start Speed | 0 | 255 | 5 | - | U8 | ||
| Ignition Off Timeout | 0 | 65536 | 60 | - | U16 | ||
| Remember iButton ID,
while Trip detected |
0 (Disable) | 1 (Enable) | 0 | - | U8 | ||
| Trip Mode | 0 (Between) | 1 (Continous) | 0 | - | U8 | ||
| Configuring format: | <Enable>,<StartStopSpeed>,<IgnitionOffTimeout>,<RememberiButton>,<Mode> | ||||||
Global and External devices parameters
| Parameter | ID | Possible Parameter Value | Default Value |
|---|---|---|---|
| Profile Change On Event | 100 | 0/1 (0 – disable, 1 – enable) | 0 |
| Prefered records saving destination | 101 | 0/1 (0 – internal memory, 1 – SDcard) | 10 |
| Analog Input 1-2 Type | 105 | 0/1 ( 0 – 10 V, 1 – 30 V) | 0 |
| Analog Input 3 Type | 106 | 0/1 ( 0 – 10 V, 1 – 30 V) | 0 |
| Static Navigation On/Off | 107 | 0/1 (0 – disable, 1 – enable) | 1 |
| Records Sorting | 108 | 0/1 ( 0 – from newest, 1 – from oldest) | 0 |
| Active Data Link Timeout | 109 | 0 – 259200 (time in seconds) | 5 |
| Accelerometer Filter Start Value | 112 | 1 – 10 (time in seconds) | 1 |
| Accelerometer Filter Stop Value | 113 | 1 – 255 (time in seconds) | 30 |
| Total Odometer source | 114 | 0/1/2/3/4 (0 – GPS, 1 – LVCAN, 2-ALLCAN, 3-FMS, 4-KLINE) | 0 |
| J1708 Enable parameter | 115 | 0/1 (0 – disable, 1 – enable) | 0 |
| GNSS Satellite System | 116 | 0/1/2/3/4 (0 – all available, 1 – GPS, 2 – GLONASS, 3 – GNSS (all available) + SBAS, 4 – GPS + SBAS) | 0 |
| NTP mode | 129 | 0/1/2/3 (0 – disable, 1 – NTP + NITZ2, 2 – NTP Only, 3 – NITZ Only) | 0 |
| GNSS TMO For NTP | 121 | 0-300 | 0 |
| Garmin Ping | 117 | 0/1 (0 – disable, 1 – enable) | 0 |
| Garmin Unicode | 118 | 0/1 (0 – disable, 1 – enable) | 1 |
| COM1 baudrate | 119 | 0 – 115200 | |
| COM1 Mode | 120 | 0-255 (5 - Silent,97 – LLS Mode,98 – LCD Mode,
99 – RFID Mode, 100 – RFID MF7 Mode, 101 – Garmin Mode, 161 – COM TCP Link Mode, 177 – COM TCP Link Mode Binary, 203 – DTO 1731, 204 –SE500, 10-11 – reserved) |
|
| COM2 Baudrate | 122 | 0 – 115200 | 115200 |
| COM1 start byte | 123 | 0 - 255 | 0 |
| COM2 Mode | 124 | 0 – 255 (5 - Silent, 13 - FM Log, 15 – NMEA,
97 - LLS, 98 - LCD, 99 - RFID, 100 - RFID M7, 101 - Garmin, 161 - COM TCP Link, 177 - COM TCP Link binary) |
5 |
| TCP Link mode buffering | 125 | 0/1 (0 – disable, 1 – enable) | 0 |
| COM1 end byte | 126 | 0 - 255 | 0 |
| COM2 start byte | 127 | 0 - 255 | 0 |
| COM2 end byte | 128 | 0 - 255 | 0 |
| COM1 Timestamp | 151 | 0/1 (0 – disable, 1 – enable) | 0 |
| COM1 CMD ID | 152 | 0 – 255 | 6 |
| COM2 Timestamp | 153 | 0/1 (0 – disable, 1 – enable) | 0 |
| COM2 CMD ID | 154 | 0 – 255 | 6 |
| Records saving/Sending | 157 | 0/1/2 (0 – After GNSS fix,1 – Always, 2 – After time synchronization) | 0 |
| SMS Event number | 222-231 | SMS Event number | „“ |
| SMS Event ID | 300-499 | SMS Events | |
| Authorized iButtons | 500-999 | Authorized iButtons FFFFFFFF | - |
| RS485 Activate | 232 | 0/1 (0 – disable, 1 – enable) | 0 |
| RS485 Baudrate | 233 | 0 – 115200 | 115200 |
| RS485 Mode | 234 | 0 – 255 (5 – Silent, 13 – Log mode, 15 – NMEA, 97 – LLS Mode, 161 – TCP link mode,
171 – Binary mode) |
5 |
| LLS 1-5 adress | 256-260 | 0,255 | 0 |
| SIM1 GPRS APN | 240 | All character range | |
| SIM1 GPRS USER | 241 | All character range | |
| SIM1 GPRS PASS | 242 | All character range | |
| SIM2 GPRS APN | 243 | All character range | |
| SIM2 GPRS USER | 244 | All character range | |
| SIM2 GPRS PASS | 245 | All character range | |
| Tachograph ignition source | 158 | 1/2/3/4 | 3 |
| Tachograph device | 159 | 0 - DTC0 1381, 1 - SE5000 | 0 |
| Tacho web | 160 | 0/1 (0 – disable, 1 – enable) | 0 |
| Tacho web domain | 161 | Maximum 56 Char | Empty |
| Tacho web port | 162 | 0 - 65535 | 0 |
| Tacho web start delay | 174 | 0 – 255 (Min) | 5 |
| Blue-tooth Power | 164 | 0/1/2 (0-disable,1-enable hidden,2-enable visible) | 0 |
| Blue-tooth Name | 165 | String | |
| Blue-tooth DINx call trigger | 170-173 | 0/1 (0 – disable, 1 – enable) | 0 |
| Blue-tooth DINx call trigger number index | 166-169 | 0 – 9 (numbers from predefinedfined list) | 0 |
CAN
| Parameter name | ID | Minimum value | Maximum value | Recommended value | Value type |
|---|---|---|---|---|---|
| CAN 1 Enable parameter | 146 | 0 | 2 | 1 | U8 |
| CAN 1 Baud Rate | 147 | 0 | 1000 | 250 | U32 |
| CAN 1 operational mode | 148 | 0 | 1 | 0 | U8 |
| CAN 2 Enable parameter (Used for tachograph) | 149 | 0 | 2 | 1 | U8 |
| CAN 2 Baud Rate | 150 | 250 | 500 | 250 | U32 |
| CAN 2 operational mode | 163 | 0 | 1 | 0 | U8 |
LVCAN
| Parameter name | ID | Minimum value | Maximum value | Recommended value | Value type |
|---|---|---|---|---|---|
| LVCAN mode | 903 | 0 | 2 | 0 | U8 |
| Send data with 0, if ignition is off | 904 | 0 | 1 | 1 | U8 |
AutoCAN
| Category name | Element ID | Element name |
|---|---|---|
| Cruise Control/Vehicle Speed | 346 | Brake switch |
| 347 | Wheel based speed | |
| 348 | Cruise control active | |
| 349 | Clutch switch | |
| 350 | PTO state | |
| Electronic Engine Controller #2 | 351 | Accelerator pedal position 1 X |
| 352 | Engine Percent Load At Current Speed X | |
| Fuel Consumption | 353 | Engine total fuel used |
| Dash Display | 354 | Fuel level 1 X |
| Electronic Engine Controller #1 | 355 | Engine speed X |
| Vehicle Weight ** | 356-370 | Axle location |
| Tire location | ||
| Axle weight | ||
| Engine Hours, Revolutions: HOURS | 371 | Engine total hours of Operation X |
| Vehicle Identification | 372 | Vehicle identification number X |
| FMS Standard interface | 373 | SW-version supported X |
| 374 | Diagnostics supported X | |
| 375 | Requests supported X | |
| High Resolution Vehicle Distance | 376 | High resolution total vehicle distance X |
| Service Information | 377 | Service distance |
| Tachograph | 378 | Vehicle motion X |
| 379 | driver 2 working state X | |
| 380 | driver 1 working state X | |
| 381 | Vehicle overspeed | |
| 382 | Driver 1 time rel. states | |
| 383 | Driver 2 time rel. states | |
| 384 | Driver 1 card X | |
| 385 | Driver 2 card X | |
| 386 | Direction indicator | |
| 387 | Tachograph performance X | |
| 388 | Handling information X | |
| 389 | System event X | |
| 390 | Tachograph vehicle speed X | |
| Engine Temperature 1 | 391 | engine coolant temperature X |
| Ambient Conditions | 392 | Ambient Air Temperature X |
| Driver’s Identification | 393 | Driver 1 ID |
| Driver’s Identification | 394 | Driver 2 ID |
| Fuel Economy | 395 | Fuel rate |
| 396 | Instantaneous Fuel Economy | |
| PTO Drive Engagement | 397 | At least one PTO engaged |
| PTO Drive Engagement | 397 | At least one PTO engaged |
| High Resolution Fuel Consumption (Liquid) | 398 | High resolution engine total fuel used |
K-Line parameters
| Name | Parameter name | Configuration ID | Available Values |
|---|---|---|---|
| KLINE Driver Recognize | Priority | X050 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Driver 1 working state | Priority | X051 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Driver 2 working state | Priority | X052 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Overspeed | Priority | X053 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Driver 1 card | Priority | X054 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Driver 2 card | Priority | X055 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Driver 1 rel time states | Priority | X056 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Driver 2 rel time states | Priority | X057 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Vehicle speed | Priority | X058 | 0 – disable 1 – low 2 – high |
| High level | 0 – 255 km/h | ||
| Low level | 0 – 255 km/h | ||
| Generate event | 0 – On range exit 1 – On range entrance 2 – On both 3 – Monitoring 4 – Hysteresis 5 – On change | ||
| KLINE Odometer | Priority | X059 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Distance | Priority | X060 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Tacho Timestamp | - | X061 | - |
| KLINE Driver 1 ID | Priority | X062 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Driver 2 ID | Priority | X063 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Vehicle Identification Number | Priority | X065 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Vehicle Registration Number | Priority | X066 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Card 1 issuing number state | Priority | X067 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change | ||
| KLINE Card 2 issuing number state | Priority | X068 | 0 – disable 1 – low 2 – high |
| High level | N/A | ||
| Low level | N/A | ||
| Generate event | 3 – Monitoring 5 – On change |
IO Properties
I/O properties are additional data sources, which are recorded along with usual GPS data.
IO#0 (ID=x300)
I/O#0 priority
Parameter defines I/O property type of priority: 0 is disabled, 1 is low, 2 – high, 3 – panic, 4 – SW21, 5 – SW22, 6 – SW23, 7 –SW24.
| Minimum value | Maximum value | Recommended value | Goes with (Depends on) parameters | Value type |
|---|---|---|---|---|
| 0 | 7 (ex.3) | 0 | I/O#0 property parameter I/O#0 High level I/O#0 Low level I/O#0 logic operand I/O#0 averaging constant |
S8 |
I/O#0 High level
Parameter defines high value of triggered I/O property. This parameter is used to set thresholds for I/O properties to generate events.
| Minimum value | Maximum value | Recommended value | Goes with (Depends on) parameters | Value type |
|---|---|---|---|---|
| 0 | 9999999 | 1 | I/O#0 property parameter - priority I/O#0 Low level I/O#0 logic operand I/O#0 averaging constant |
S32 |
I/O#0 Low level
Parameter defines Low value of triggered I/O property. This parameter is used to set thresholds for I/O properties to generate events.
| Minimum value | Maximum value | Recommended value | Goes with (Depends on) parameters | Value type |
|---|---|---|---|---|
| 0 | 9999999 | 1 | I/O#0 property parameter - priority I/O#0 High level I/O#0 logic operand I/O#0 averaging constant |
S32 |
I/O#0 Logic operand
Parameter defines when event is sent: 0 is event on exit, 1 – on entrance, 2 – on both, 3 – monitoring, 4 – hysteresis, 5 – on change.
| Minimum value | Maximum value | Recommended value | Goes with (Depends on) parameters | Value type |
|---|---|---|---|---|
| 0 | 5 | 2 | I/O#0 priority I/O#0 High level |
S8 |
I/O#0 Averaging constant
Parameter defines I/O property sample length to average. If no averaging needed default value is 10.
| Minimum value | Maximum value | Recommended value | Goes with (Depends on) parameters | Value type |
|---|---|---|---|---|
| 1 | 99999999 | 1 | IO#0 (ID=x300) I/O#0 priority |
S32 |
To configure I/O#0 element every value above should be separated with comma. For example,
configuring first profile I/O#0 element by SMS, SMS should look like:
“ setparam 3300 1,0,0,1,1” (“ setparam <profile number>300 <priority>,<HighLevel>,<LowLevel>,<Operand>,<AvgC
onstant>”)
Other I/O property elements can be configured in the same logic. All I/O element parameters are listed below.
| I/O Element Number | I/O element parameters | I/O Element Number | I/O element parameters |
|---|---|---|---|
| I/O#0 – Digital input 1 | x300 | I/O#31 – Dallas ID 2 | x327 |
| I/O#1 – Digital input 2 | x301 | I/O#32 – Dallas Temp. 2 | x328 |
| I/O#2 – Digital input 3 | x302 | I/O#33 – Dallas ID 3 | x329 |
| I/O#3 – Digital input 4 | x303 | I/O#34 – Dallas Temp. 3 | x330 |
| I/O#4 – Digital output 1 | x304 | I/O#35 – Dallas ID 4 | x331 |
| I/O#5 – Digital output 2 | x305 | I/O#36 – Dallas Temp. 4 | x332 |
| I/O#6 – Digital output 3 | x306 | I/O#37 – Dallas ID 5 | x499 |
| I/O#7 – Digital output 4 | x307 | I/O#38 – Dallas Temp. 5 | x500 |
| I/O#8 – Analog input 1 | x308 | I/O#39 – Dallas ID 6 | x501 |
| I/O#9 – Analog input 2 | x309 | I/O#40 – Dallas Temp. 6 | x502 |
| I/O#10 – Analog input 3 | X445 | I/O#41 – Fuel Counter | x333 |
| I/O#11 – Profile | x310 | I/O#42 – Ignition | x334 |
| I/O#12 – Battery voltage | x311 | I/O#43 – RFID COM1 | x335 |
| I/O#13 – Battery Current | x312 | I/O#44 – Total Odometer | x519 |
| I/O#14 – GPS PDOP | x313 | I/O#45 – RFID COM2 | x520 |
| I/O#15 – GPS HDOP | x314 | I/O#46 – Aixis X | X521 |
| I/O#16 – Ext. Voltage | x315 | I/O#47 – Aixis Y | X522 |
| I/O#17 – GNSS Status | x316 | I/O#48 – Aixis Z | X523 |
| I/O#18 – Movement sensor | x317 | I/O#49 – IMSI code | x524 |
| I/O#19 – Trip Odometer | x318 | I/O#50 – CCID code | x525 |
| I/O#20 – GSM Operator | x319 | I/O#51 – SD Status | X526 |
| I/O#21 – Speed | x320 | I/O#52 – LLS #1 Fuel | x336 |
| I/O#22 – iButton ID | x321 | I/O#53 – LLS #1 Temp. | x337 |
| I/O#23 – GSM Signal level | x322 | I/O#54 – LLS #2 Fuel | 338 |
| I/O#24 – Network Type | x447 | I/O#55 – LLS #2 Temp. | x339 |
| I/O#25 – Cell ID | x450 | I/O#56 – LLS #3 Fuel | x340 |
| I/O#26 – Area Code | x451 | I/O#57 – LLS #3 Temp. | x341 |
| I/O#27 – Deep Sleep | x323 | I/O#58 – LLS #4 Fuel | x342 |
| I/O#28 – PCB Temp. | x324 | I/O#59 – LLS #4 Temp. | x343 |
| I/O#29 – Dallas ID 1 | x325 | I/O#60 – LLS #5 Fuel | x344 |
| I/O#30 – Dallas Temp. 1 | x326 | I/O#61 – LLS #5 Temp. | x345 |
