Requirements for eSIM

Main Page > Frequently Asked Questions - FAQ > Requirements for eSIM

An embedded-SIM (eSIM) or embedded universal integrated circuit card (eUICC) is a form of programmable SIM card that is embedded directly into a device. The surface mount format provides the same electrical interface as the full size, 2FF and 3FF SIM cards, but is soldered to a circuit board as part of the manufacturing process. In machine to machine (M2M) applications where there is no requirement to change the SIM card, this avoids the requirement for a connector, improving reliability and security. An eSIM can be provisioned remotely; end-users can add or remove operators without the need to physically swap a SIM from the device.


In order to use eSIM with Teltonika FM devices some basic requirements must be met.


1. eSIM dimensions

Must match standard MFF2 eSIM size. A drawing is below:

ESIMreq.jpg
















2. eSIM pin-out

There are two default eSIM pin-outs:

Pin-outs.jpg










The only difference in pin-outs is the IO pin – 2 or 3. Both versions of pin-outs are suitable for devices with eSIM.


3. Requirements for eSIM packing reel:

13“ in diameter.

4. eSIM can be used with most of Teltonika fleet management devices:

DeviceList.jpg





































Project Current SIM configuration Possibility to solder eSIM? Possibility to have eSIM + another SIM?
FMB100/FMB110/FMB120/FMB130 uSIM Yes Yes. uSIM - channel 1; eSIM - channel 2.