FMU126 LED status
From Wiki Knowledge Base | Teltonika GPS
Revision as of 09:49, 12 April 2021 by Tomas.kriauciunas (talk | contribs) (Protected "FMU126 LED status" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
Main Page > EOL Products > FMU126 > FMU126 Manual > FMU126 LED status
This section is an explanation of LED indications on an FMU126 device.
Behaviour | Meaning |
---|---|
Permanently switched on | GNSS signal is not received |
Blinking every second | Normal mode, GNSS is working |
Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
Behaviour | Meaning |
---|---|
Blinking every second | Normal mode |
Blinking every two seconds | Sleep mode |
Blinking fast for a short time | Modem activity |
Off | Device is not working or Device is in boot mode |