(
diff)
← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Introduction
We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.
This document describes FM63YX<ref>FM63XX – FMB630, FM6300, FM6320.</ref> devices firmware improvements, changes, new features implementations as well as current firmware release version.
Firmware versioning
FM.VER.[XX
].[YY
].[ZZ
]
- Syntax description
XX
– client number. Value range: 00 - Teltonika, 02...99 - Specific clients.
YY
– branch number, shows major changes in firmware, i.e. new module support added or new major feature added.
ZZ
– major changes like bigger fixes, improvements and new features addition.
Firmware versions
FIRMWARE VERSION
|
RELEASE DATE
|
CHANGES
|
01.00.34 (Current firmware release version for FM63YX)
|
2020.08.10
|
- Tachograph driver data handling improvements
- Tacho download improvements
- Tachograph data reading improvement
- CAN functionality improvements
- Ignition detection improvements
- FMS monitoring and scanning improvements
- Timestamp generation improvements
- Configuration file security improvement
- New FMS IO element Tell tale added
- AutoCAN, ManualCAN improvements
|
01.00.17
|
2019.07.15
|
- Carrier functionality added
- GPS functionality improvements
|
01.00.13
|
2019.05.16
|
- GPS stability improvements
- Modem stability improvements
- Ping functionality added
- New baud rates added
- K-Line periodic record added
- New CAN modes added
- Sleep modes improvements
- Bluetooth improvements
- Configuration improvements
- GPRS data limit improvements
- Immobilizer scenario improvements
- Tacho download improvements
- FMS elements improvements
- Profile change improvements
- Dual SIM functionality improvements
- Operator search algorithm improvements
- SMS/GPRS commands optimization
- Tacho front panel support added
- Data sending improvements
- Jamming functionality improvements
- Odometer improvements
- Accelerometer calibration added
- TCP Link mode improvements
- Tachograph data reading improvements
- Fuel counter functionality improvements
- Alternative DDD file selection added
|
00.02.77
|
2018.03.01
|
- Modem stability improvement
- Accelerometer improved
- Functionality for sending 0 value added for CAN/AutoCan
- Tachograph data reading improvement
- Records saving, deleting improvements
|
00.02.72
|
2018.01.15
|
- Configuration saving changes
- Profile switching improved
- Tachograph files sending improvement
- K-line records saving changed
- Communication with server improved
- New parameters for taking picture with camera
- GSM modem stability increased
- Command „setdigout“ improvements
|
00.02.67
|
2017.11.22
|
- MVC functionality to send picture in roaming
- Geofence allow negative coordinates
- VIN and VRN I/O parameters added to KLINE elements
- Network ping timeout parameter removed
- NITZ time synchronization use UTC time
- Tacho periodical Kline record is sent only if any kline element is enabled and tacho has valid data to save GPRS data
- Getstatus command updated with more info
- GPRS session closing improved for all modem types
- New SMS commands introduced
- New IO parameters added
- Trip odometer/Continuous odometer improvement
- GPRS WeekTime removed
- DDD download improvement
- UDP data sending improvement
- TCP link mode data sending improved
- GPRS connection handling improved
- SMS event functionality improved
|
00.02.42
|
2017.08.11
|
- Dual server support added
- iButton support improved adding full DS19 family
- NITZ Time Sync added
- Towing detection added
- Online deep sleep added (FMB630 only)
- RS485 Modes functioning improvements
- MCAN configuration improvements
- Records management improvements
- Deep sleep functionality improvements
- RS232 TCP link modes buffering parameter added
- WebDDD functionality improvements
|
00.02.32
|
2017.07.05
|
- LVCAN CNG reading added
- DTC Error codes read added sms "faultcodes"
- DTC buffer overflow check added
- Added Call Trigger functionality for DIN1/DIN2/DIN3/DIN4
- Quectel open socket local port set to 0
- BT Headset support improvements
- SMS functionality improvements
- FMB630 Black list operator GPRS blocking optimization
- Multi Sockets for FM6300 improvements
- LVCAN AVL ID list changes
- Records sending from SD via UDP optimization
- LLS via RS232, address configuration not needed now
- iButton Configuration via SMS "setparam" fix
- GPRS open procedure improvement
- GPRS close procedure on failed link starts after 5 failed connections instead of 10
- VDO/SRE parsers improved
- K-Line data saving improvements
- LVCAN/K-Line data reading improvements
- Zero coordinates handling improvements
|
00.02.27
|
2017.06.14
|
- Added Bluetooth headset support
- K-Line data cleaning added
- COM1 communication optimization
- WT^I command improvement
- Zero coordinates handling improvements
- KLINE IO elements optimized
- SMS functionality improvements
- Not needed functions/parameters removed
- CAN settings improvements
- SD support optimization
- Improved Quectel GNSS support
- Tachograph functionality improvements
- SimPin status check for second sim slot optimized
|
00.02.22
|
2017.05.17
|
- TG1000 Support added
- Quectel GNSS support added
- Bluetooth log functionality added
- Added WT^I: command support to LCD and TCP link modes
- Added GPRS commands support over UDP protocol
- New FM6300 hardwares 9,10,11 support added
- Device configuration handling improvements
- USB, COM1 communication optimization
- Battery support improvements
- GNSS structure load optimization
- iButton detection improvements
|
00.02.15
|
2017.04.18
|
- Added MCAN/FMS selection for CAN2 parameter
- Tachograph functionality improvements
- Operator search algorithm improvements
- GPRS commands optimization
- J1708 functionality improvement
- LV-CAN support improvements
|
00.02.13
|
2017.03.29
|
- Added WT^P, WT^M, WT^G commands support in LCD and TCP link modes
- Full support of CAN Silent mode added
- iButton notification scenario added
- 6 Dallas temp sensors support added
- TACHOGRAPH resume to remote session while data downloading added
- SMS odoset <value> added
- TACHOGRAPH auto connect to server improvements. Tachograph functionality improvements
- Stoneridge SE5000 k-line data parsing improvements
- REC search from FLASH improved
- UDP packet size limit changed
- CAN/LV-CAN200 functions improvements
- FOTA functionality improvements
- Static Navigation improvements
- Eventual SMS logic optimization. SMS functionality improvements
- Camera function optimization
- TCP Link Mode improvements
- Network Ping Tmo Default Value set to "0"(Disabled)
- Sending records from SD card to UDP server improved
- Changes profile without time synchronization if event is set on switch
|
00.01.15
|
2016.12.27
|
- GPRS functionality improvement
|
00.01.10
|
2016.12.27
|
- Geofencing over speeding added
- Configuration backup after configurator added
- Added jamming sensitivity configuration
- Added Operator Black list functionality
- Network type IO element added
- Camera image by configurable timeout added
- Remember Ibutton ID parameter added
- WebDDD support added
- Added new functionality via COM1\2 port for LCD duplicate records
- TM25Q support added
- Added Acceleration/Deceleration IO elements and functionality
- Deep sleep improvements
- setparam sms will accept '?' for parameters which value must be left untouched then making configuration
- Digital outputs control improvements
- setdigout GPRS command rework
- Configurator operation timeout via COM1/COM2 bug fixed
- AVL packet size depends of hardware. Now it fits to maximum modem packet size
- HW detection improvements
- USB packet handling changed
- Dallas temperature sensor logic improved. Dallas temperature sensors sms commands improvements
- Remote log improvements
|
00.00.51
|
2016.09.20
|
- Camera functionality improvements
|
00.00.49
|
2016.09.01
|
- Remote log added
- K-Line support added
- Debug added for Accelerometer
- Authorized phone number protection added
- ECO driving scenario improvements
- Autogeofence improvements
- Static navigation function optimization
- setparam validation added for KLINE, CAN, IO
- Tacho KLINE data reading optimization
- SD card support improvements
- CAN/AutoCAN improvements
- SMS functionality improvements
- IO elements configuration optimization
- FOTA functionality improvements
- Record search algorithm optimization
- Excessive idling functionality improvement
- Immobilizer functionality improvements
- RS485 LLS support improvements
- Operator list loading optimization
- Deep sleep improvements
- SMS commands improvements. SMS answer speed increased
|
00.00.33
|
2016.5.17
|
|