FMP100 LED status

From Wiki Knowledge Base | Teltonika GPS
Revision as of 14:20, 7 December 2021 by Arnas.Zeb (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > Fast & Easy Trackers > FMP100 > FMP100 Manual > FMP100 LED status

Package contents

FMP100 Full.gif
  • The FMP100 device have predefined LED and buzzer indication set out of the box. To better understand device indications, in this page will be explained device behavior.


GSM indication

GSM indication.gif
  • When device doesn't obtain GSM signal, after every 300 seconds period, for the 0.5 second three times will light up RED light and buzzer will make sound simultaneously.



GNSS indication

GNSS indication.gif
  • When device doesn't obtain GNSS signal, after every 60 seconds period, for the 1 second will light up RED light.
  • When device have GNSS signal, after every 60 seconds period, for the 1 second will light up GREEN light.



Event indication

Event indication.gif
  • When FMP100 button is pressed, you will hear an audio notification for the 1 second to confirm button click was registered.
  • Private mode will be indicated with GREEN light, which will blink three times for 0.5 second.
  • Business mode will be indicated with BLUE light, which will blink three times for 0.5 second.