Template:FMB Accelerometer Features settings

Excessive Idling

Informs you if your vehicle is stationary but engine is on for selected period of time to help you to save fuel.

Unplug Detection

Unplug detection scenario generates event when FMB1YX is unplugged from external power and plugged into external power.

Towing Detection

Towing detection feature helps to inform driver about car deporting. FMB1YX generates event when car is being towed or lifted, for example in case of vehicle evacuation.

Crash Detection

If Crash detection is enabled, it monitors acceleration on each axis, which helps to detect an accident.
If Crash trace is disabled crash detection event will be generated (included into send record) only when scenario starts and finishes.
If Crash trace is enabled FMB120 will collect acceleration data every 40 msec. Buffer is big enough to hold data for 5 seconds and on Crash Event detection, records will be generated from this buffer, following these conditions:

• Every second Acceleration changed more then > 50mG Data will be collected and records generated 5 seconds after the event using the same conditions.
• Every generated record will have accelerometer X Y Z values included.
• Each record will have accurate timestamps in milliseconds.

In Unplug Detection and Towing Detection scenarios if Eventual Records is enabled Event will be generated (included into send records) only when scenario starts and finishes. If Eventual Records is disabled scenario status value is sent in each AVL record.