IP67 Case

From Wiki Knowledge Base | Teltonika GPS

Product Specification


Product Specification Description
Suitable for FMx125, FMx225, FMx130, FMx230, FMB140, FMB240
Dimensions 85,0 x 67,0 x 25,6 mm (L x W x H)
Ingress Protection Rating IP67
Color Black transparent
Material PC Lexan 925
Laser engraving (optional) Teltonika Telematics branding / without branding
Cable Standard / U-type cable
Cable length 0.9 meters


How to assemble PCB with IP67 case

  1. Gently remove top and bottom covers.
  2. Insert SIM card as shown with PIN request disabled or read our Wiki how to enter it later in Teltonika Configurator. Make sure that SIM card cut-off corner is pointing outward from slot. SIM slot 1 is closer to PCB, SIM slot 2 is the top one.
  3. Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
  4. After configuration, see “PC Connection (Windows)”, attach device top and bottom cover back and press them twice to the full closure.
  5. Make sure that product casing is closed correctly.

Battery placement

Mounting recommendations with U-type cable

Mounting recommendations with a standard cable