Template:FMB965 First start card

From Wiki Knowledge Base | Teltonika GPS
Qsg rut950 teltonika.PNG

Small and smart tracker with Bluetooth

FMB965 4000X4000 1.png




How to insert Micro-SIM card

  1. Gently remove {{{model}}} cover using plastic pry tool from both sides.
  2. gently lift the PCB out of the cover
  3. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing outwards to slot.
  4. Connect the battery as shown on device.
  5. Place PCB back into the place as shown in the picture, first the end that is marked as 1 needs to inserted, then the end that is marked as 2
  6. Attach device cover back. Device is ready to be connected.

FMB965 sim ir battery insert-1.png FMB965 sim ir battery insert-2.png FMB965 sim ir battery insert-3.png FMB965 sim ir battery insert-4.png FMB965 sim ir battery insert-5.png FMB965 sim ir battery insert-6.png


Alert.png
 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB965_First_start_card&oldid=74109"