How to read data from TZ-BT04/05/05B sensor
From Wiki Knowledge Base | Teltonika GPS
Revision as of 16:27, 28 December 2023 by Arnas.Zeb (talk | contribs) (Text replacement - "Bluetooth(?!®)" to "Bluetooth®")
Main Page > Frequently Asked Questions - FAQ > How to read data from TZ-BT04/05/05B sensor
First the device Bluetooth® settings need to be configured. These are the required steps:
Disclaimer
![Alert.png](/images/d/d6/Alert.png)
If you are not using Bluetooth®, please consider turning it off or change Bluetooth® PIN to remove potential risks.
If you are using Bluetooth® we strongly recommend using AES encryption for enhanced security.
Configuration
These are instructions on how to easily read data from TZ-BT04/05/05B Bluetooth® LE sensor with Teltonika device.First the device Bluetooth® settings need to be configured. These are the required steps:
- Press
Bluetooth®
settings.
- Turn on BT Radio by pressing
Enable (hidden)
orEnable (visible)
.
- Turn on BT Radio by pressing
- Press
Bluetooth® 4.0
settings.
- Select
TZ-BT04/05/05B sensor
in BLE connectionless functionalities section. - Type your TZ-BT04/05/05B ID in
ID
field. - After all these steps press
Save to device
to save configuration. - To start BLE scan right away press
Discover BLE
.
- Select
- Press
To check if the device has already received data from TZ-BT04/05/05B Bluetooth® LE sensor, follow these steps:
- Navigate to
Status
section. - Press
I/O Info
and look if BLE Temp, BLE Battery and BLE Humidity has any values.
- Navigate to