FM36M1 Product Change Notifications

Main Page > EOL Products > FM36M1 > FM36M1 Product Change Notifications

Product change notifications (PCN) is the way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc. This page stores information regarding changes to the FM36M1. Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).

2019.04.10: IMEI/SN display on device Changes

We would like to inform you, that IMEI/SN info display on FM36M1 device will be updated in factory from june 2019.

Change description
Change type External/visual
Detailed description IMEI/SN info on device display change from barcode to QR
Old Version:
New Version:
This change will not affect device packing and logistic lists. It will remain as barcode.
Change reasons QR format will increase reliability and minimize error rate, because of the error correction feature and improved reading in low contrast.
Product release date Devices with new QR Code format will be released in manufacturing from June with 2 months of transition period. Over this period devices with barcode can be delivered as well as devices with QR code.
Affected products
Model Affected order codes Order code changes
FM36M1 FM36M1****** No changes
Change impact
Risk assessment Risk assessment for devices managament required
Suggested implementation plan Due to changes in device information display we strongly recommend to check, and prepare your tools to read QR codes.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.


2019.03.11: Top Sticker/Tampography Changes

We would like to inform you, that sticker changed to tampography of FM36M1 device and was updated in factory on the 11th of March.

Change description
Change type External/visual
Detailed description Top Sticker/Tampography design changed
Old Sticker Version:
New Tampography Version:
Change reasons 1. The Sticker was changed to Tampography
2. Added Teltonika address label Saltoniskiu st. 9B-1
3. Added WEEE label. (WEEE - Waste from Electrical and Electronic Equipment)
4. Added EAC label. (EAC - Eurasian Conformity mark)
5. Added E26 label. (E26 - E-Mark is the regulations issued by the Economic Commission for Europe)
6. Added CE label. (CE - certification mark that indicates conformity with health, safety, and environmental protection standards)
Product release date Updated tampography will be used from the time when the stock will be sold all leftovers.
Affected products
Model Affected order codes Order code changes
FM36M1 FM36M1******* No changes
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan No implementation plan needed
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.