FMC001 Speed Elements

Revision as of 14:05, 13 September 2019 by Tomas.kriauciunas (talk | contribs) (Protected "FMC001 Speed Elements" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > EOL Products > FMC001 > FMC001 Manual > FMC001 Speed Elements
  • In the GPS element, there is a 2-byte speed. - this is speed based on GPS data, it is always included in the packet.
Wiki gps speed.png
  • If I/O element "Speed" is enabled. In AVL data packets IO element with ID 24 is going to be included. It is a 2-byte I/O element - it is the same speed from GPS, just that it is included as IO element to have the possibility to create events for it.
Wiki io speed.png
  • There is a I/O element with ID 37. This is a 1 byte element - it is speed from OBDII data. It is wise to use this element as the base for correct speed readings, as GPS data sometimes might be not very accurate.
Wiki obdspeed.png