Getting Started With TachoSync

From Wiki Knowledge Base | Teltonika GPS
Revision as of 12:05, 12 November 2024 by Simonas.stankaitis (talk | contribs) (Created page with "Category:TachoSync {| align="right" |__TOC__ |} Here you will find all needed information related to requirements of the devices and their configuration. Additional...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
TachoSync > Getting Started With TachoSync

Here you will find all needed information related to requirements of the devices and their configuration. Additionally, you will familiarize with network requirements and will find a login link, so you could easily start using TachoSync platform.


Fleet management Device requirements

Supported models FMB640, FMC640, FMM640, FMB641, FMC650, FMM650.
Minimal Firmware version 01.02.11 or later, works with every firmware

Device configuration

In order for a device to connect to TachoSync the domain and port must be configured in configurator:

TachoSync PortnDomain.png

Network requirements

If your SIM cards are within Mobile Operator’s VPN (private APN), the following must be ensured and paid special attention.
1. Must ensure that domain https://tacho.teltonika.lt/ can be resolved from within Operator’s network.
2. Following domain and port must be allowed by the operator:

  • Domain: tacho.teltonika.lt
  • Port: 29000


When using VPN SIM cards, you should still configure https://tacho.teltonika.lt/ domain in your configurator, not the plain IP address.

How to access TachoSync

Link to login: https://tacho.teltonika.lt/dashboard

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Getting_Started_With_TachoSync&oldid=101137"