DashCam Firmware errata

Firmware Version

We are always improving our device's performance, stability, and reliability.
This document describes Dashcamplatform and FMX125 devices' firmware improvements, changes, new features implementations as well as current firmware release version.

NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.

To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.

4gyd2i1HYC4XqBni7T7robKdUGuIYmRjXubVE7pS8yIAAAD0ABfJUm+SNLBCpdvuD+UoHMztegOBnLICjSh7oDYzFOWnuURqrhZHQBGisnU4mMf6cjVlB9YxvD/mwL4qOPdN85fuCsstsJ7kxXcRYxiAa5hD7w13ydfW+RjR+0BTHEr1yt5KKrw2yZvOhewONNonvcH3vHHDeCDihme+fkwSS02gbT0hri4uoIOoOmkrdWvbshD/wXeFEDDCCzGPhQAEAAAAAAAIix8=

In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.

You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.

Firmware download for FMX125/FMX225/FMC650

You can download all necessary firmware by clicking here.

Firmware for FMC650

FIRMWARE VERSION	RELEASE DATE	CHANGES
03.01.01.Rev.02 ,Spec ID 1111	2025-08-18	Added sdformat command support for DSM camera
03.01.00.Rev.22 ,Spec ID 1111	2025-06-16	Iridium SBD transmission improvement. Base firmware merge with Spec ID 1111 Additional network fixes.
03.00.16.Rev.104	2024-11-12	Support DSM FW 2.4.0 added. Port tacho border crossing IO.
03.00.16.Rev.101	2024-08-06	Geofence functionality pictures receiving fix. Green Driving pictures receiving fix. File transfer modem rebooting state fix. Additional verbal information by request/download/upload pictures.
03.00.16.Rev.100	2024-06-12	Port Tacho Border Crossing IO. VDO Counter functionality fix. Full Base Support
03.00.14.Rev.116	2024-04-05	NEW: ADAS support.
03.00.14.Rev.114	2024-03-01	Stable work with DualCam/DashCam. NEW: Two camera support.
03.00.14.Rev.112	2023-11-23	Added DualCam/DashCam support for FMC650.

Firmware for FMC125

FIRMWARE VERSION	RELEASE DATE	CHANGES
04.00.00.Rev.372	2025-08-18	Old timestamp shown issue fixed
04.00.00.Rev.371	2025-06-19	Full base update NEW: QT and MEIG modem support Network stability improvements
03.29.00.Rev.534	2024-07-15	Full base update Port stability related changes Metadata version 4 support for DualCam and DashCam
03.29.00.Rev.531	2024-02-15	Full base update
03.27.13.Rev.663	2023-07-31	Network stability improvements.
03.27.13.Rev.662	2023-06-05	DashCam accessory-monitoring feature DashCam support added. DualCam capture buffer loop

Firmware for DashCam

DashCam FIRMWARE VERSION	RELEASE DATE	CHANGES
V2.2.3	2022-05-20	Added watch dog for camera to restart it self if camera will stuck