Template:FM36YX SMS events

From Wiki Knowledge Base | Teltonika GPS
Revision as of 09:51, 1 June 2018 by Mantas.slipaitis (talk | contribs) (Created page with "SMS events functionality allows {{{model|FM36YX}}} to send a configured SMS when an event is triggered. This event can be triggered by:<br /> * Green Driving; * OverSpeeding;...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

SMS events functionality allows FM36YX to send a configured SMS when an event is triggered. This event can be triggered by:

  • Green Driving;
  • OverSpeeding;
  • Authorized Driving;
  • Immobilizer;
  • Trip start/stop;
  • Geofence;
  • AutoGeofence;
  • I/O event.

When any of the above events is triggered, FM36YX sends a configured SMS message to a defined phone number. If SMS events is activated, but there are no numbers defined in SMS events PreDefined Numbers list (figure below), then the device will not send any messages.

FM36YX Predefined list.png

The sent SMS messages format is according to:
“Date Time EventText”

For example, if FM36YX is configured to send an SMS (figure 36), when Digital Input 1 reaches High level, with priority High and configured to generate event on both range enter and exit (figure37), then the sent SMS is:
“2016/1/20 12:00:00 Digital Input 1”

FIGURE

FIGURE

The SMS Text field can be altered and any text can be entered. Maximum message length is 90 symbols (numbers, letters and symbols in ASCII, except for comma “,”).

Bw nb.png ATTENTION! If FM36YX is in Deep Sleep mode and SMS event occurs with LOW priority (which does not wake up FM36YX), then the device does not send the message. It is saved in device memory until it wakes up from Deep Sleep mode and GSM modem starts working normally. After it wakes up, all the messages that are saved in memory will be sent, but keep in mind that only 10 messages can be saved in memory – all other messages will not be saved, until there is room in device memory.

Configuration