FMA202 LED status
From Wiki Knowledge Base | Teltonika GPS
Revision as of 07:02, 6 September 2018 by Marek.rakalovic (talk | contribs) (Created page with "{{FMB20x_LED_status|model=FMB202}}")
Main Page > EOL Products > FMA202 > FMA202 Manual > FMA202 LED status
This section is an explanation of LED indications on an FMB202 device.
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |
