Template:FMB96X First start card

From Wiki Knowledge Base | Teltonika GPS
Qsg rut950 teltonika.PNG


FMB96X is special and smart GNSS/GSM/Blue-tooth tracker with internal high gain GNSS, GSM antennas and high capacity internal Ni-MH battery.

FMB962 main.png





How to insert Micro-SIM card

  1. Gently remove FMB96X cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Attach device cover back.
  4. Device is ready to be connected.


964cover1.png964cover2.png964cover3.png964cover4.png


Alert.png
 Note: Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

How to insert microSD card

  1. Push microSD card lock case.
  2. Open microSD card locker.
  3. Correctly insert microSD card into slot.
  4. Close microSD card locker.
  5. Push microSD card lock case to locked position.

Sd card 1.png Sd card 2.png Sd card 3.png Sd card 4.png Sd card 5.png

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB96X_First_start_card&oldid=20466"