FM36M1 LED status
From Wiki Knowledge Base | Teltonika GPS
Revision as of 12:52, 30 April 2019 by Mantas.sestokas (talk | contribs)
Main Page > EOL Products > FM36M1 > FM36M1 Manual > FM36M1 LED status
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Sleep mode or Deep sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |
