FMB920 Product Change Notifications

Main Page > Basic Trackers > FMB920 > FMB920 Product Change Notifications
  Product change notifications (PCN) is the way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc. 

This page stores information regarding changes to the FMB920. Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).

2019.12.02: new FMB920 case design

Effective December 2019, FMB920 trackers will be shipped with new case design.

Change description
Change type Case
Detailed description New case design
Old version:
New version:





Change reasons QR format will increase reliability and minimize error rate, because of the error correction feature and improved reading in low contrast.
Product release date December 2019
Affected products
Model Affected order codes Order code changes
FMB920 FMB920******* New casing
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2019.10.09: Top Device Marking Changes

We would like to inform you, that tampography of FMB920 device was updated to engraving in factory on the 8th of October.

Change description
Change type External/visual
Detailed description Device marking changed from tampography to laser printing. Information provided on module will remain the same
Old Version:
New Version:
Change reasons To improve manufacturing speed, efficiency and reliability

To increase quality, precision and durability of marking.

Product release date Planned date: 2019 October
Affected products
Model Affected order codes Order code changes
FMB920 FMB920******* No changes
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan No implementation plan needed
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

2019.08.14: Top Tampography Changes

We would like to inform you, that tampography of FMB920 device was updated in factory on the 5th of August.

Change description
Change type External/visual
Detailed description Top tampography design changed
Old Version:
New Version:
Change reasons 1. Updated Emark certificate number.
Product release date Updated tampographs will be used from the time when the stock will be sold all leftovers. Planned date: 35 week
Affected products
Model Affected order codes Order code changes
FMB920 FMB920******* No changes
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

2019.07.22: new no brand Eco friendly boxes

Effective September 2019, FMB920 trackers with no brand packaging will be shipped with a new no brand eco friendly box.

Change description
Change type Packaging
Detailed description Improved and more environmentally friendly packaging box
Old single packaging version:


Dimensions: 165 (W) x 145 (D) x 35 (H)
New single packaging version:

Dimensions: 175 (W) x 150 (D) x 35 (H)
Old group packaging version:


Dimensions: 355 (W) x 175 (D) x 60 (H)
New group packaging version:

Dimensions: 355 (W) x 175 (D) x 60 (H)
Change reasons The new box is better for the environment
Product release date Devices with new packaging will be released in manufacturing from september with 2 months of transition period. Over this period devices with white packaging can be delivered as well as devices with the new eco boxes.
Affected products
Model Affected order codes Order code changes
FMB001, FMB010, FMB100, FMB110, FMB120, FMB122, FMB125, FMB202, FMB204, FMB900, FMB920, FMB964, FMT100, FMB130, MTB100. FMB001******, FMB010******, FMB100******, FMB110******, FMB120******, FMB122******, FMB125******, FMB202******, FMB204******, FMB900******, FMB920******, FMB964******, FMT100******, FMB130******, MTB100******. No changes
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan Due to the new look of boxes we strongly recommend to update your marketing materials. Because of the new color of the packaging box, if necessary, update your branding materials (stickers, logo layouts).
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2019.06.14: Device module information display changes

We would like to inform you, that information display on device module TM2500 will be updated in factory from july 2019.

Change description
Change type External/visual
Detailed description Information display on TM2500 module will change from sticker to laser print. Information provided on module will remain the same.
Old Version:
New Version:
Change reasons Laser printing will increase reliability, speed, and will reduce paper waste.
Product release date Devices with new module marking will be released in manufacturing from july with 2 months of transition period. Over this period devices with sticker can be delivered as well as devices with laser print.
Affected products
Model Affected order codes Order code changes
FMB001, FMB010, FMB100, FMB110, FMB120, FMB122, FMB125, FMB202, FMB204, FMB900, FMB920, FMB964, FMT100, FMB640, FMB130, MTB100, TMT250, GH5200. FMB001******, FMB010******, FMB100******, FMB110******, FMB120******, FMB122******, FMB125******, FMB202******, FMB204******, FMB900******, FMB920******, FMB964******, FMT100******, FMB640******, TMT250******, FMB130******, MTB100******, GH5200******. No changes
Change impact
Risk assessment The change will not affect clients. All the module characteristics will remain unchanged. The only sticker on module will be changed to laser print. The displayed information will remain the same.
Suggested implementation plan. Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in the customs clearance process.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

2019.05.02: new eco friendly box

Effective May 2019 week 20, FMB920 trackers will be packed with a new eco friendly box.

Change description
Change type Packaging
Detailed description Improved and more environmentally friendly packaging box
Old version:
New version:
Change reasons The new box is better for the environment
Product release date May 2019, week 20

2019.04.10: IMEI/SN display on device Changes

We would like to inform you, that IMEI/SN info display on FMB920 device will be updated in factory from june 2019.

Change description
Change type External/visual
Detailed description IMEI/SN info on device display change from barcode to QR
Old Version:
New Version:
This change will not affect device packing and logistic lists. It will remain as barcode.
Change reasons QR format will increase reliability and minimize error rate, because of the error correction feature and improved reading in low contrast.
Product release date Devices with new QR Code format will be released in manufacturing from June with 2 months of transition period. Over this period devices with barcode can be delivered as well as devices with QR code.
Affected products
Model Affected order codes Order code changes
FMB920 FMB920****** No changes
Change impact
Risk assessment Risk assessment for devices management required
Suggested implementation plan Due to changes in device information display we strongly recommend to check, and prepare your tools to read QR codes.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

2019.03.01: new eco friendly box

Effective March 2019, FMB920 trackers will be shipped with a new eco friendly box.

Change description
Change type Packaging
Detailed description Improved and more environmentally friendly packaging box
Old version:
New version:
Change reasons The new box is better for the environment
Product release date March 2019
Affected products
Model Affected order codes Order code changes
FMB920 FMB920******* No changes
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2019.02.20: Top Tampography Changes

We would like to inform you, that tampography of FMB920 device was updated in factory on the 20th of February.

Change description
Change type External/visual
Detailed description Top tampography design changed
Old Version:
New Version:
Change reasons 1. Updated Teltonika address to Saltoniskiu st. 9B-1
2. Added WEEE label. (WEEE - Waste from Electrical and Electronic Equipment)
Product release date Updated tampographs will be used from the time when the stock will be sold all leftovers. Planned date: week 10
Affected products
Model Affected order codes Order code changes
FMB920 FMB920******* No changes
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.