Template:FMB1 LED status
From Wiki Knowledge Base | Teltonika GPS
Revision as of 09:59, 1 June 2020 by Sandra.Gasyte (talk | contribs)
This section is an explanation of LED indications on an FMB1YX device.
Behaviour | Meaning |
---|---|
Permanently switched on | GNSS signal is not received |
Blinking every second | Normal mode, GNSS is working |
Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
Behaviour | Meaning |
---|---|
Blinking every second | Normal mode |
Blinking every two seconds | Sleep mode |
Blinking fast for a short time | Modem activity |
Off | Device is not working or Device is in boot mode |
CAN Status LED indications
Behaviour | Meaning |
---|---|
Blinking fast constantly | Reading CAN data from vehicle |
Permanently switched on | Wrong program number or wrong wire connection |
Off | Wrong connection or CAN processorin sleep mode |