FMS Tell Tale Status
FMS Tell Tale Status Introduction
Tell Tale was created in order to receive all available dashboard indication events that are available on truck via FMS protocol according to J1939 standard. SAE J1939 is the vehicle bus standard used for communication and diagnostics among vehicle components. Based on the same architecture FMS protocol dedicated to telematics systems is available. It has certain standardized parameters available, such as fuel consumption, engine work-hours, etc. Please visit http://www.fms-standard.com/ for more information and message structure.
What parameters should be enabled
Configurable parameters via SMS/GPRS commands can be found at FMB640_Device_Family_Parameter_list#FMS
How to parse Tell Tale data
Test
Quick links
FMS-Standard Description Document
 |
Tell Tale only available on vehicles that support FMS standard |
|
Tell Tale examples are provided in FMS-Standard Description document that is publicly available |
|
Availability of parameter depends on vehicle’s model and configuration of the FMS interface of the truck. |
FMS Tell Tale status is supported on FMB640 FMC640 FMM640 FMB630 FM6300 devices.
