FLEET MAINTENANCE SCHEDULES (DELIVERY)

Project description

Delivery service is a business where efficiency is everything. Customers expect their goods to be delivered in time and meeting these expectations is a must if the company wants to make a solid profit. Anything what causes delays should be minimized or eliminated. Facilitated by GPS devices, timely vehicle maintenance can greatly reduce the number of irregularities and, thus, help the business grow.

We glad that you decide to test our “FLEET MAINTENANCE SCHEDULES (DELIVERY)” solution.

Here you will find how to prepare and to test this solution.

What you need for a solution?

• Teltonika FM device which is compatible with this use case and have OBD connection.
• The SIM card in order to get data to your server.
• FOTA WEB to remotely send the configuration to the device.
  
• Teltonika Configurator to set up FM device correctly for the solution.

Installation

First step you need to finde in your car OBD connector to do this visit Location of OBD plug

Second step it just connect your FMB device to OBD connector.

Configuration

2. Configuring FLEET MAINTENANCE SCHEDULES:

Parameter ID - Parameter name

Trip settings:

• 11800 - Scenario priority (0 - Disable, 1 - Low, 2 - High, 3 - Panic).

• 11801 - Eventual settings (0 - Disable, 1 - Enable), if disabled - trip settings will come with periodical data.

• 11802 - Mode (0 - Continuous, 1 Between Records). If Between Records option is selected distance will be counted until any record is made. Then odometer will be reset to zero and start counting until next record is made.
• 11803 - Start Speed (km/h).
• 11804 - Ignition OFF timeout (s).
• 7031 - ID of SMS recipient.
• 8031 - SMS Text.
• 700 - Eco Score Allowed Events.

• 11806 - Odometer Calculation Source (0 - GNSS, 1 - OBD).
• 11807 - current Odometer Value (km). Odometer data will be counted from provided value.
• 11806 - Odometer Calculation Source (0 - GNSS, 1 - OBD).
• 11807 - current Odometer Value (km). Odometer data will be counted from provided value.

Ignition Source

• 101 - Eventual settings (1 - DIN 1, 2 - Accelerometer, 4 - Power Voltage, 8 - Engine RPM).

• 104 - Hight Voltage ( MIN - 0, MAX - 30000).
• 105 - Low Voltage ( MIN - 0, MAX - 29999).

Quick start: From default configuration to FLEET MAINTENANCE SCHEDULES in one SMS:

"  setparam 11800:1;11801:0;101:4;104:30000;105:12000"

After configuration device start parameters now we go to configure OBD II elements. In the photo below (this is example case) you see where you must go to configurate main parameter that you need to have from device. In OBD II window you see lot of I/O elements in this window you will configure device in your needed scenario.