Template:FMB SMS events

SMS events functionality allows FMB120 to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.
Then any of the I/O elements is triggered, FMB120 sends a configured SMS message to a defined phone number. If SMS events is activated, but there are no numbers defined in GSM PreDefined Numbers list (similarly as in the picture below), then the device will not send any messages.

The sent SMS messages format is according to:
“Date Time Current Coordinate Event Text”
For example, if FMB120 is configured to send an SMS, when Ignition reaches High level, with priority High and configured to generate event on both range enter and exit (figure 50), then the sent SMS is:
2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 Ignition 1

The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma “,”).

If FMB120 is in Deep Sleep mode and SMS event occurs with LOW priority (which does not wake up FMB120), then the device does not send the message. It is saved in device memory until it wakes up from Deep Sleep mode and GSM modem starts working normally. After it wakes up, all the messages that are saved in memory will be sent, but keep in mind that only 10 messages can be saved in memory – all other messages will not be saved, until there is room in device memory.