FMC13A LED status
From Wiki Knowledge Base | Teltonika GPS
Revision as of 13:45, 25 April 2022 by Tomas.kriauciunas (talk | contribs) (Created page with "{{Template:FMC1 LED status |model=FMC130 |CAN_status= }} 2")
Main Page > EOL Products > FMC13A > FMC13A Manual > FMC13A LED status
This section is an explanation of LED indications on an FMC130 device.
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |
