FMM920 LED status
From Wiki Knowledge Base | Teltonika GPS
Revision as of 12:50, 23 May 2022 by Tomas.kriauciunas (talk | contribs) (Created page with "{{Template:FMB1 LED status|model=FMM920 |CAN_status= }} 2")
Main Page > Basic Trackers > FMM920 > FMM920 Manual > FMM920 LED status
This section is an explanation of LED indications on an FMM920 device.
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |
