Template:FMB Status info

From Wiki Knowledge Base | Teltonika GPS

123

Status info enables the user to monitor real time information of FMB1YX. There are 5 possible fields total: Device Info field, GNSS Info field, GSM Info field, OBD/CAN Adapter Info field and I/O Info field. User is able to export all of the information to .HTML file using an icon which is at the top right corner of the device info table.

Fmb120 status info.png

Device Info shows device name, firmware version, last device start time, RTC Time, power voltage (mV), device IMEI, SD card free space, Device uptime, Battery voltage (mV) and internal battery status.
GNSS Info shows:

  • Real time GNSS status information: module status (ON, Deep/GPS/Online sleep mode), how many GNSS packets device received from startup, fix status and the last GNSS fix time.
  • Satellite information: how many and what type of satellites are visible. How many satellites are used for location positioning.
  • Location information: latitude, longitude, altitude, angle, HDOP, PDOP and speed.

GSM Info shows:

  • GSM status: modem status, SIM status, GPRS status, actual operator code and GSM signal level.
  • GPRS traffic: how much data has been sent and received by the device.
  • Sockets information: which server domain and port is used.
  • Records: how many records were sent to the server since last data reset, when last record was sent to the server and when was the last server response.
  • SMS count: how many SMS messages did FMB1YX receive and how many SMS responses were sent from the device.

OBD Info shows the main OBD information (if device connected to the vehicle via OBD II Bluetooth dongle adapter): vehicle VIN code and OBD protocol used.
In CAN Adapter info user is able to see main information from LV-CAN200/ALL-CAN300 (if device connected to LV-CAN200/ALL-CAN300): program number and LV-CAN200/ALL-CAN300 software version.
I/O Info shows the values from all configurable I/O elements.