FMM250 CE / RED

From Teltonika Telematics Wiki
Revision as of 14:58, 7 May 2024 by Justinas.strelciunas (talk | contribs) (Created page with "{{CE_UKCA_description}} {{ce standards}}")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > CAN Trackers & Adapters > FMM250 Certification & Approvals > FMM250 CE / RED
CE logo
UKCA logo

The Radio Equipment Directive (2014/53/EU) ensures a Single Market for radio equipment by setting essential requirements for safety and health, electromagnetic compatibility, and the efficient use of the radio spectrum.

Description

It applies to all products using the radio frequency spectrum. It has been applicable since 13 June 2016. As of 13 June 2017 the new set of requirements of RED are applicable to the equipment.

According to RED directive, the conformity against the following requirements needs to be demonstrated:

  • 3.1(a): Radio equipment shall be constructed so as to ensure the protection of health and safety of persons and of domestic animals and the protection of property, including the objectives with respect to safety requirements set out in Directive 2014/35/EU (LVD), but with no voltage limit applying;
  • 3.1(b): Radio equipment shall be constructed so as to ensure an adequate level of electromagnetic compatibility as set out in Directive 2014/30/EU (EMC).
  • 3.2: Radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.

Starting with 20 December 2020 only the EN62368-1 will be accepted as a proof of conformity for LVD part of CE RED requirements.

Standards applied

The conformity with the essential requirements has been demonstrated against the following harmonized standards: