TachoSync Company Card Authenticator

From Wiki Knowledge Base | Teltonika GPS
Revision as of 10:49, 14 November 2024 by Simonas.stankaitis (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
TachoSync > TachoSync Company Card Authenticator

Overview

To authenticate with the tachograph remotely you would need to download Company Card Authenticator. It is a Teltonika's built application that uses company card data to authenticate with the tachograph. In this page you will find information on system requirements that are necessary for downloading this a software. Furthermore, you will learn where to find, download and install Company Card Authenticator.

Purpose

Company Card Authenticator is a software that is used to perform remote authentication with a tachograph to perform DDD file download.

Company Card Authenticator requirements

OS Windows 10; Windows 11
CPU: Intel or AMD processor with 64-bit support
Disk Storage: 500 MB of free disk space
Internet: An Internet connection is required for CCA connection to Tacho Sync
How to download: You can download the CCA application once logged in to Tacho Sync (by navigating to Settings >> Download Company Card Authenticator).

Downloading and installing

To start using Company Card Authenticator follow these steps:

1. Go to TachoSync web page. TachoSync link: https://tacho.teltonika.lt/dashboard

2. Go to settings and select Company Card Authentificator. The download should start shortly after.

3. Open downloaded file and this tab should pop up. Press Next on it

4. Agree with the terms and services and press Next

5. Change directory if needed and then press Install

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=TachoSync_Company_Card_Authenticator&oldid=101182"