Template:FMB9 Electrical characteristics
From Wiki Knowledge Base | Teltonika GPS
Revision as of 12:41, 22 May 2018 by Mantas.slipaitis (talk | contribs)
Electrical characteristics
| Characteristic description | Value | |||
|---|---|---|---|---|
| Min. | Typ. | Max. | Unit | |
| Supply Voltage: | ||||
| Supply Voltage (Recommended Operating Conditions) | +10 | +30 | V | |
| Digital Output (Open Drain grade): | ||||
| Drain current (Digital Output OFF) | 120 | µA | ||
| Drain current (Digital Output ON, Recommended Operating Conditions) | 3.3 | mA | ||
| Static Drain-Source resistance (Digital Output ON) | 300 | mΩ | ||
| Digital Input: | ||||
| Input resistance (DIN1) | 47 | kΩ | ||
| Input voltage (Recommended Operating Conditions) | 0 | Supply voltage | V | |
| Input Voltage threshold (DIN1) | 2.5 | V | ||
| Analog Input: | ||||
| Input voltage (Recommended Operating Conditions) | 0 | +30 | V | |
| Input resistance | 150 | kΩ | ||
| Measurement error on 12V | 0.9 | % | ||
| Additional error on 12 V | 108 | mV | ||
| Measurement error on 30 V | 0.33 | % | ||
| Additional error on 30 V | 88 | mV | ||
|
Analog Input error margin can increase if temperature varies. |
Absolute maximum ratings
| Characteristic description | Value | |||
|---|---|---|---|---|
| Min. | Typ. | Max. | Unit | |
| Supply Voltage (Absolute Maximum Ratings) | -32 | +32 | V | |
| Drain-Source clamp threshold voltage (Absolute Maximum Ratings), (Idrain = 2 mA) | +36 | V | ||
| Digital Input Voltage (Absolute Maximum Ratings) | -32 | +32 | V | |
| Analog Input Voltage (Absolute Maximum Ratings) | -32 | +32 | V | |
