Template:FM36YX I/O settings
From Wiki Knowledge Base | Teltonika GPS
Revision as of 14:37, 31 May 2018 by Simkunas.ma (talk | contribs) (Created page with "==Monitoring== {{Template:FM36YX_Monitoring|model={{{model|FM36YX}}}}} ==Event generating== {{Template:FM36YX_Event_generating|model={{{model|FM36YX}}}}} ==Hysteresis== {{Te...")
Monitoring
I/O monitoring starts after enabling I/O element and setting up I/O parameters as it is shown below:
Event generating
Events happen when the value of enabled I/O intersects thresholds (enter, exit or on both) predefined by High and Low level thresholds. Table below defines all available values of I/O settings.
| Setting | Value |
|---|---|
| Priority | low, high |
| High level | maximum threshold |
| Low level | minimum threshold |
| Generate event | on interval enter, on interval exit, on both enter and exit |
| Average constant | 1 – 232 (4 Bytes) |
Hysteresis
I/O elements can generate events according to hysteresis algorithm. If I/O event operand “Hysteresis” is selected, events will be generated as it is shown in the illustration below (I/O speed is taken as I/O value example):
