FM36 flush
From Wiki Knowledge Base | Teltonika GPS
Revision as of 12:39, 1 June 2018 by Simkunas.ma (talk | contribs) (Created page with "Initiates all data sending by GPRS to specified target server. Comma separated parameters go as numbered: # - IMEI # - APN # - GPRS LOGIN # - GPRS PASSWORD # - IP # - PORT # -...")
Initiates all data sending by GPRS to specified target server. Comma separated parameters go as numbered:
- - IMEI
- - APN
- - GPRS LOGIN
- - GPRS PASSWORD
- - IP
- - PORT
- - MODE (0-TCP/1-UDP)
Parameters are separated by comma (no spaces needed). In case you don’t need to enter parameter (Login/Pass) – do not put space, simply put comma and write next parameter.
- Example: opa opa flush 353976012555151,banga,,,212.47.99.62,12050,0
| Response details | Description |
|---|---|
| FLUSH SMS Accepted | FLUSH SMS Accepted |
| # records found on FLASH | Number of records found on FLASH |
| Minimum Records to Send: # | Number of minimum saved records to send |
| GPRS Enabled: # | State of the GPRS connection, 0 – disabled; 1 – enabled |
| Time Sync: # | Indicates time synchronization on the device, 0 – not synchronized; 1 – synchronized |
- Example: FLUSH SMS Accepted. 11 records found on FLASH. Minimum Records to Send: 1. GPRS Enabled: 1. Time Sync: 1.
