Template:FMB1 Movement parameters
From Wiki Knowledge Base | Teltonika GPS
Revision as of 16:33, 12 December 2019 by Donatas.Andriulionis (talk | contribs)
| Movement source | Vehicle on Stop mode | Vehicle Moving mode |
|---|---|---|
| Ignition (recommended) | If ignition (ignition source) is logic low. | If ignition (ignition source) is logic high. |
| Accelerometer (internal movement sensor) | Accelerometer (internal movement sensor) does not detect movement. | Accelerometer (internal movement sensor) detects movement. |
| GNSS | GPS fix is available and vehicle speed is lower than 5 km/h. | GPS fix is available and vehicle speed is higher than 5 km/h. |
| While GPS fix is unavailable, Object Motion Detection Settings are working like in Msensor mode. | ||
| CAN speed | If speed from BT OBDII dongle is equal to 0 km/h. | If speed from BT OBDII dongle from BT OBDII dongle is higher than 0 km/h. |
