FMM800 SMS events

From Wiki Knowledge Base | Teltonika GPS
Revision as of 10:17, 1 September 2022 by Martynas.juozaitis (talk | contribs) (Created page with "SMS events functionality allows {{{model|FMM800}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

SMS events functionality allows FMM800 to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.
When any of the I/O elements is triggered, FMM800 sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in GSM Predefined Numbers list (similarly as in the picture below), then the device will not send any messages.

Fmx800 predef numlist.png

The sent SMS messages format is following:
"Date Time Current Coordinate Event Text"
For example, if FMM800 is configured to send an SMS, when Ignition reaches high level while configured with High priority and event generation is set to both range entrance and exit (as shown in the figure below), then the following SMS is sent:
"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 Ignition 1"

FMB120 SMS events.png

The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").

Bw nb.png If FMM800 is in Deep Sleep mode and an SMS event occurs with Low priority (which does not wake up FMM800), then the device does not send the message. It is saved to device memory until it wakes up from Deep Sleep mode and GSM modem starts working normally. After it wakes up, all the messages that are saved to memory will be sent, but keep in mind that only 10 messages can be saved to memory – all other messages will not be saved, until there is free memory space.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=FMM800_SMS_events&oldid=75622"