Template:MTB100 First start card

Small and smart tracker with Blue-tooth

How to insert Micro-SIM card, connect power supply cable and internal back-up battery

1. Gently remove MTB100 cover using plastic pry tool from both sides.
2. Separate PCB from plastic cover and connect power supply cable.
3. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
4. Connect internal back-up battery.
5. Attach device cover back. (Do not forget to configure the device before reassembling the device!)
6. Device ready to use!

Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.