Main Page > Autonomous Trackers > TAT240 > TAT240 Firmware and configurator > TAT240 Stable firmware
![]() |
CAUTION! Both firmwares (Modem and BlueNRG) must be flashed into device. Failing so can lead to unexpected device behavior and rapid battery discharge. |
TAT240 BlueNRG & Modem FIRMWARE UPDATE GUIDE
TATXYZ FIRMWARE UPDATE GUIDE |
---|
Download Firmware and Configurator from STABLE FIRMWARE or SHORT-TERM FIRMWARE pages.
After device connection to Configurator:
1) Select Update firmware;
2) Select to flash Firmware(*.e.XIM) file;
3) Click on file;
4) And select Open.
Wait until the device will upload the firmware.
When parameters successfully loaded:
1) Select Update firmware;
2) Select to flash BlueNRG firmware(*.bin);
3) Click on file;
4) And select Open.
TAT240 Stable Firmware and Software
|
|
CHANGELOG
VERSION | RELEASE DATE | CONFIGURATOR CHANGES | FIRMWARE CHANGES |
---|---|---|---|
Firmware version: 55.00.16.Rev.569 BlueNRG version: 1.0.3.Rev.00 |
2024.08.19 |
|
|
VERSION | RELEASE DATE | CONFIGURATOR CHANGES | FIRMWARE CHANGES |
---|---|---|---|
Firmware version: 55.00.16.Rev.564 BlueNRG version: 0.4.12 Configurator version: 1.7.74_B.TAT1_R.6 |
2024.03.12 |
|
|
Firmware version: 55.00.16.Rev.562 BlueNRG version: 0.4.11 Configurator version: 1.7.74_B.TAT1_R.6 |
2023.12.20 |
|
|