Template:FMB Status info

{{{##switch: 1 # 1 = one # 2 = two # three}}}

value if test string is not empty

Status info enables the user to monitor real time information of FMB1YX. Following fields are displayed: Device Info field, GNSS Info field, GSM Info field, OBD/CAN Adapter Info field and I/O Info field. User is able to export all of the information to .HTML file using an icon which is at the top right corner of the Device Info area.

Device Info shows device name, firmware version, last device start time, RTC Time, power voltage (mV), device IMEI, SD card free space, Device uptime, Battery voltage (mV) and internal battery status.

GNSS Info shows:

Real time GNSS status information: module status (ON, Deep/GPS/Online 'Sleep mode), the amount of GNSS packets device received from startup, fix status and the last GNSS fix time.
Satellite information: the amount and type of satellites that are visible, and the amount of satellites used for location positioning.
Location information: latitude, longitude, altitude, angle, HDOP, PDOP and speed.

GSM Info shows:

GSM status: modem status, SIM status, GPRS status, actual operator code and GSM signal level.
GPRS traffic: the amount of data that has been sent and received by the device.
Sockets information: which server domain and port is used.
Records: how many records were sent to the server since last data reset, when the last record was sent and when was the last server response.
SMS count: the amount of SMS messages FMB1YX has received and the amount of SMS responses that were sent from the device.

OBD Info shows the main OBD information (when the device connected to the vehicle via OBD II Bluetooth dongle adapter): vehicle VIN code and OBD protocol used.
In CAN Adapter Info user is able to see main information from LV-CAN200/ALL-CAN300 (when the device connected to LV-CAN200/ALL-CAN300): program number and LV-CAN200/ALL-CAN300 software version.
I/O Info shows the values from all configurable I/O elements.