Template:FMB CAN SMS/GRPS commands
Revision as of 07:00, 29 May 2018 by Linas.zaldokas (talk | contribs) (Undo revision 13102 by Linas.zaldokas (talk))
| Command | Description | Response |
|---|---|---|
| lvcansetprog # | Set program number to LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. # three digit number that identity vehicle. |
Yes |
| lvcansimpletacho # | Add or remove simpletacho start byte. # - 0 or 1 (0 – don’t add start byte, 1 – add start byte). |
No |
| lvcangetprog | Get program number from LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. | Yes |
| lvcangetinfo | Get information about connected LV-CAN200/ALL-CAN300. | Yes |
| lvcanclear # | Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values. # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).. |
Yes |
| allcanmode | Turn on ALL-CAN300 mode. | Yes |
| lvcanmode | Turn on LV-CAN200 mode. | Yes |
| lvcanfaultcodes | Read DTC fault codes. | Yes |