Template:FM36 System Settings

System settings have 7 configurable parameters:

• Sleep settings, where user can turn GPS sleep/deep sleep on or off;
• Analog Input Settings, where user can choose analog input range 10 V or 30 V,

depending on needed accuracy (lower range gives higher accuracy of measurements), and input voltage;

• Object Motion Detection Settings, where user can configure 3 ways how FM36YX

will detect stopped movement, and change its working mode (for working modes, read section 5.13)

• Static navigation settings, where user can turn static navigation on or off;
• Records Settings, where user can enable or disable records when GPS is not

available (no time synchronization);

• GNSS Settings, where user can choose satellite system and GNSS FIX Timeout Time

(if after timeout there will not be synchronized time, it will be synchronized via NTP server).

• Ignition Source sets ignition triggered functionalities to be triggered by:
  • Power Voltage (if voltage is between High Voltage Level and Low Voltage

Level the ignition is considered to be turned on);

• • Digital Input (DIN1 ON – ignition on, DIN1 OFF – ignition off);
  • {{Movement (if accelerometer/movement sensor detects movement then

ignition is on, if movement stops – ignition is off).}}