Template:FM36 Features Parameters

Green Drivind scenario

Parameter ID	Parameter Type	Default value	Value range		Value	Parameter name
			Min	Max
ID	U8	default	min	max	0 – value = 0	Name
					1 – value = 1
ID	U8	default	min	max	Value	Name
1600	U8	0	0	3	0 – disable	Green Driving scenario
					1 – Dout not control scenario
					2 – Dout1 controls scenario
					3 – Dout2 controls scenario
1602	Float	0.25	0.25	0.85	G	Max Acceleration Force
1603	Float	0.25	0.35	0.85	G	Max Braking Force
1604	U16	0.3	0.1	1.0	rad/second	Max Cornering Force

Over Speeding

Parameter ID	Parameter Type	Default value	Value range		Value	Parameter name
			Min	Max
1601	U8	0	0	3	0 – disable	OverSpeeding scenario
					1 – Dout not control scenario
					2 – Dout1 controls scenario
					3 – Dout2 controls scenario
1605	U16	0	0	260	km/h	Max Cornering Force

Jamming

Parameter ID	Parameter Type	Default value	Value range		Value	Parameter name
			Min	Max
1606	U8	0	0	3	0 – disable	Jamming detection scenario
					1 – Dout not control scenario
					2 – Dout1 controls scenario
					3 – Dout2 controls scenario

Immobilizer

Parameter ID	Parameter Type	Default value	Value range		Value	Parameter name
			Min	Max
1607	U8	0	0	3	0 – disable	Immobilizer scenario
					1 – Dout not control scenario
					2 – Dout1 controls scenario
					3 – Dout2 controls scenario
1609	U8	30	5	65535	seconds	Immobilizer ignition timeout
1608	U8	0	0	1	0 – disable	iButton list checking scenario
					1 – enabled

Excessive Idling detection

Parameter ID	Parameter Type	Default value	Value range		Value	Parameter name
			Min	Max
1610	U8	0	0	1	0 – disable	Excessive Idling detection
					1 – enable
1611	U8	0	0	255	seconds	Time to stationary
1612	U8	0	0	255	seconds	Time to movement

Trip

Parameter ID	Parameter Type	Default value	Value range		Value	Parameter name
			Min	Max
1280	U8	0	0	1	0 – disable	Trip start/stop detection
					1 – enable
1281	U8	5	0	255	km/h	Start Speed
1282	U16	60	0	65535	seconds	Ignition Off Timeout
1283	U8	0	0	2	0 – Between records	Trip distance mode
					1 – Continuous trip
					1 – Continuous
1284	Uint8	-	0	1	0 – disable	Enable odometer value setting
					1 – enable
1285	U32	1	0	4294967295	meters	Continuous odometer value
1286	U8	0	0	1	0 – disable	Name
					1 – enable

Geofencing

Parameter ID	Parameter Type	Default value	Value range		Value	Parameter name
			Min	Max
1020	U32	1000	0	1000000	meters	Frame border
Geofence Zone #1 parameters
1030	U8	0	0	1	0 – circle	Geofence Zone #1 Shape
					1 – rectangle
1031	U8	0	0	3	0 – disabled	Geofence Zone #1 Priority
					1 – low
					2 – high
					3 – panic
1032	U8	0	0	2	0 – On exiting zone	Geofence Zone #1 Generate Event
					1 – On entering zone
					2 – On both
1033	Float	-	-180	180	number	Geofence Zone #1 Longitude (X1)
1034	Float	-	-90	90	number	Geofence Zone #1 Latitude (Y1)
if parameter Geofence Zone #1 Shape (1030) - rectangle
1035	Float	0	-180	180	number	Geofence Zone #1 Longitude (X2)
1036	Float	0	-90	90	number	Geofence Zone #1 Latitude (Y2)
if parameter Geofence Zone #1 Shape (1030) - circle
1035	Float	0	0	1000000	meter	Geofence Zone #1 radius
1036	If shape is circle, parameter ID = 1036 is not used.