Making positive changes to driving behavior is an important step in cutting the automotive accidents and wasted fuel during trip. FMB Blue-tooth application will help to monitor driver behavior and receive notifications about possible violations in real time!
Download BTAPP here: 
FMB device settings
For application to work and detect settings correctly – FMB must be configured correctly. Driver is notified about the event as soon as it is being detected in the device. So the driver may adjust his driving behavior accordingly. Application has not only the visual display of event, but also sound notification, so the phone screen may be even off. Events are generated according FMB device configuration, so make sure ECO Driving, Idling detection, Overspeeding and High RPM features and events are enabled. NOTE: High RPM event is available from FMB001/FM3001 or FMB1 series devices with connected LV-CAN200 or ALL-CAN300 adapter.
Recommended FMB parameters
- Green Driving – Optional. If enabled in Features menu – it will generate harsh acceleration, harsh breaking and harsh cornering events. Depending on required sensitivity – you can adjust acceleration, braking and cornering coefficients (smaller – more sensitive)
- Over speeding – Optional. If enabled in Features menu – it will generate over speeding events when vehicle speed will exceed configured threshold.
- Excessive idling – Optional. If enabled in Accelerometer Features menu – it will generate excessive idling events when vehicle speed will exceed configured threshold.Eventual records must be enabled.
- RPM – Optional. If enabled in I/O menu it will generate excessive idling events when vehicle speed will exceed configured threshold.
- Notice: RPM can be obtained from OBD or using LVCAN. You should use only one. Otherwise you will get 2 events simultaneously.
- Trip – Mandatory. Trip scenario must be enabled.
- Eventual records must be enabled.
- Mode must be configured as Continuous.
- Depending on your requirements you can adjust trip start speed and Ignition OFF Timeout.
- Eco score Allowed Events describe how many events are tolerated during trip of 100 kilometers
- Bluetooth – Mandatory. Bluetooth must be enabled.
BTAPP interface
Eco Driving
- You must connect to FMB device by clicking Bluetooth icon, and slecting your FMB device.
- Each event which was detected by FMB device will be displayed in the application as well. User can be notified visually, event icon will turn yellow and event count will be increased accordingly, and by sound alert as well (can be optionally enabled in application settings).
- Eco score is calculated by FMB device depending on total event amount and trip distance.
- Eco score, distance and duration is being updated periodically automatically.
- Trip status can be Ongoing and Finished. Trip finish is decided by FMB configuration.If application will be connected to FMB device during ongoing trip – application will update event count, score, distance and trip duration for ongoing trip.
Trip Type
In trip type menu you can make:
- You can select trip type for each of your ongoing trips.
- You can change trip type as many times during trip as you will need. Only last trip type before trip is finished will be recorded and sent to the server.
- You can select default trip type for your trips by performing long press on the icon and confirming the change.
History
In history view you can view all recorded trips. If trip has was completed with application still communicating with FMB device – in history it will be marked by blue line. If device disconnected during trip from the FMB for long period of time– line will be yellow. Usual cases for trip disconnection could be leaving vehicle before trip was completed by FMB configuration. It can be adjusted by Trip parameter Ignition OFF timeout in FMB configuration.