Template:FMB9 First start card

FMB9YX GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas and internal battery

How to insert Micro-SIM card

1. Gently remove FMB9YX cover using plastic pry tool from both sides.
2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
3. Attach device cover back.
4. Device is ready to be connected.

Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

How to insert microSD card

1. Push microSD card lock case.
2. Open microSD card locker.
3. Correctly insert microSD card into slot.
4. Close microSD card locker.
5. Push microSD card lock case to locked position.

NOTE: SD cards are only used in devices manufactured until 2018-04. Newer devices have internal flash memory.