Wiki Knowledge Base | Teltonika GPS

Template:FMB64 First start card

Revision as of 13:58, 25 October 2018 by Mantas.gadliauskas (talk | contribs) (Created page with "centre <b>{{{model|FMB640}}} GNSS/GSM/Bluetooth terminal with {{{antenna|GNSS/GSM antennas}}} and Ni-MH battery</b> {{{pic|Image:Fmb640....")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Qsg rut950 teltonika.PNG


FMB640 GNSS/GSM/Bluetooth terminal with GNSS/GSM antennas and Ni-MH battery

Fmb640.png



How to insert Micro-SIM card

  1. Unscrew the screws.
  2. Gently remove FMB1YX cover using plastic pry tool from both sides.
  3. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is not pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  4. Attach device cover and put the screws back in.
  5. Device is ready to be connected.

1-1 fmb640 SIM.png1 fmb640 SIM.png2 fmb640 SIM.png 3 fmb640 SIM.png4 fmb640 SIM.pngFMB640 sim insert-6.png


Alert.png
 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

How to insert microSD card

  1. Push microSD card lock case.
  2. Open microSD card locker.
  3. Correctly insert microSD card into slot.
  4. Close microSD card locker.
  5. Push microSD card lock case to locked position.

Sd card 1.png Sd card 2.png Sd card 3.png Sd card 4.png Sd card 5.png

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB64_First_start_card&oldid=20543"